This is an aluminum compressed air blow gun with a 9 mm hose barb inlet port. The nozzle is screwed in a female M12x1.25 threaded outlet port. The blow gun has a female M12x1.25 outlet port to fit a nozzle (not included).
The air blow gun is suitable for a pressure range from 1 to 10 bar (14.5 to 145 psi) and temperatures from -10 to 50°C (14 to 122°F). The internal parts are made out of brass and stainless steel with NBR sealing. Due to the on the handle, there is no cold feeling when holding and using the air blow gun. The internal parts of the gun are made out of brass and stainless steel while its sealing is made out of NBR.
To operate the air blow gun, connect it to a compressed air hose, point away from yourself and pull the trigger. Always wear protective gear to avoid injuries from any blown debris.
Pros:
- Easy setup and operation
- No cold hands thanks to the plastic coating
- Mount a hose with a 9 mm inner diameter to the hose pillar
Cons:
- The ‘on/off’ trigger is not suitable for precise flow control
- A nozzle is not included
AGLA series
The AGLA series includes aluminum compressed air blow guns with various intake port types and nozzle versions. The intake port can be a female threaded G1/4 inch and other options include hose barbs and air couplings, of various sizes, screwed in it. The outlet port can be equipped with a short nozzle, a noise protection nozzle, a short nozzle with a protective screen or it can have no nozzle. These air blow guns are suitable for the operating pressure ranging from 1 to 10 bar (14.5 to 145 psi) and the operating temperature ranging from -10 to 50°C (14 to 122°F).
Specifications
Air inlet device-sided : 9 mm
Material : Aluminum
Seal material : NBR (nitrile rubber)
Max. operation pressure (bar) : 10
Max. operation pressure (psi (lbf/in²)) : 145
Min operation pressure (bar) : 1
Nozzle design : No nozzle
Min temperature (°C) : -10
Max temperature (°C) : 50
Connection size outlet : M12x1.25
Coating housing : Plastic coated
Reviews
There are no reviews yet.