CHEM-THANE – P-200
Description
CHEM-THANE P-200 is a low temp curing, water clear, 2-component, 89% solids modified aliphatic /polyaspartic coating that combines the best attributes of high-grade epoxy and urethane coatings. CHEM-THANE P-200 offers the highest UV resistance available, remains flexible over time and has very good abrasion and chemical resistance. CHEM-THANE P-200 has zero reportable VOC’s, zero HAPS and meets all USDA/FDA guidelines for use in federally inspected facilities.
Uses & Typical Coverage
As a BODY or FINISH coat: CHEM-THANE P-200 is an excellent non-yellowing, body or finish coat for any ROCK-TRED floor or wall coating system. This coating is designed for use in lower temp environments (0° – 40°F) that require fast return to service and/or superior UV resistance while maintaining VOC compliance. Typical coverage per coat is from 80 sq. ft. /gal. (20 mils) to 150 sq. ft. / gal. (11 mils). For a lower viscosity you may add up to 21 oz. P-200 Viscosity Reducer per mixed gallon of P-200.
As a PRIMER coat: CHEM-THANE P200 can be used as a low temp water clear primer by adding P-200 Viscosity Reducer at 21 oz. per mixed gallon of P-200. Coverage will increase to 200+ sq. ft. / gal. (8+ mils).
Physical Properties
| Volume mix ratio | 1.5 to 1 (Resin to Hardener) |
| Viscosity (mixed) | 376 CPS Typical |
| Solids Content (%) | 89% (ASTM D-2697) |
| Hardness (ASTM D-2440) | 60 (Shore D) @ 7-day cure |
| VOC | Compliant with all US Regulations |
| Application Temps. | 0° – 40° F |
| Gel Time (see “Limitations” section below for more details) | 60 minutes @ 75°F |
| Dry to Touch (recoat with compatible products) | 30 minutes @ 75°F |
| Through Cure | 1 hour @ 75°F |
| Open for light traffic/use | 24 hours @ 75°F |
| Shelf Life | 1 Year in unopened units |
Reviews
There are no reviews yet.