Key Features
Deep Socket Reach This deep 24 mm socket gives you the extra reach you need for fasteners on longer studs or recessed hardware. It is a better fit when a standard-depth socket comes up short. Better Fastener Grip DeWalt DirectTorque technology is built to help prevent rounding fasteners while improving grip. That matters most when you are working on tight or already worn hardware. Shop-Ready Finish The polished chrome vanadium finish helps resist chipping and flaking, and the hard-stamped markings are easier to read over time. The knurled control ring also gives you a better hold when your hands are greasy.
Overview
The DeWalt DWMT96370OSP 1/2-In. Drive Deep 6-Point Socket 24 mm is an individual metric hand socket built for turning 24 mm fasteners with a 1/2-inch drive ratchet, breaker bar, or torque wrench. This is a deep socket designed for service work where standard sockets do not give enough reach. Model Number: DWMT96370OSP.
If you spend time around suspension hardware, larger equipment fasteners, or long studs, the deep design is the real value here. It lets the socket reach farther over protruding threads without giving up the larger 1/2-inch drive size that mechanics and serious DIYers usually want for higher-torque work. The 6-point opening is the right call when you want stronger contact on the flats of the fastener instead of flirting with rounded corners.
DeWalt also builds this socket with DirectTorque technology, which is there for a reason, not just a line on a spec sheet. It is meant to help reduce fastener rounding and improve grip, especially on hardware that has already seen some wear. That makes a difference when you are trying to break loose stubborn nuts or you are working on equipment where damaged fasteners slow the whole job down.
The polished chrome vanadium finish gives the socket the kind of durability you want in a tool that is going to live in a box, get tossed on a cart, and see regular shop use. It helps protect against chipping and flaking, and the hard-stamped markings are more practical than light etching because size identification stays easier to spot after repeated use. DeWalt also adds a knurled control ring, which sounds simple but is genuinely useful when you are grabbing the socket with oily hands or starting it by hand before putting a ratchet on it.
As a metric 24 mm socket with a 1/2-inch square drive, it fits the common hand-tool setup many mechanics and maintenance techs already use. There is no learning curve here and no special adapter needed if your setup is built around standard 1/2-inch drive tools. Because it is sold as an individual socket, it also makes sense for replacing a missing size in an existing set instead of buying a whole new kit.
This DeWalt socket is a smart buy for automotive work, equipment service, general mechanical repair, and garage setups that need dependable single-size replacements. If 24 mm is one of the sizes you actually use, this is the kind of no-nonsense socket that earns its spot fast: deep reach, 6-point grip, readable markings, and a finish that holds up to regular use.
Reach Longer Studs and Recessed Hardware
The deep body is what separates this socket from a basic replacement. When the fastener sits farther down or the stud sticks out past the nut, this design keeps the job moving without forcing you to switch tools.
- Deep socket format for added reach
- 24 mm metric size for larger fasteners
- 1/2-inch drive for ratchets, breaker bars, and torque wrenches
Hold Fasteners Without Beating Them Up
The 6-point design and DirectTorque geometry are aimed at the same goal: better contact where it counts. That gives you a more confident fit on the fastener and helps reduce the chance of rounding under load.
- 6-point socket opening for stronger engagement on the flats
- DirectTorque technology helps improve grip
- Polished chrome vanadium finish helps protect against chipping and flaking
What’s in the Box
- (1) DeWalt DWMT96370OSP 1/2 in. Drive, 6-Point, 24 mm Deep Socket
Key Specifications
| Product Type | Socket |
|---|---|
| Drive Size | 1/2 in. |
| Socket Size | 24 mm |
| Point Count | 6-Point |
| Socket Depth | Deep |
| Measurement System | Metric |
| Configuration | Individual |
| Finish | Polished chrome vanadium |
Compatibility
Drive Interface Fits standard 1/2-inch square drive ratchets, breaker bars, and torque wrenches. Fastener Size Designed for 24 mm metric fasteners.
Built For
Automotive Mechanical Repair Equipment Maintenance Garage Toolboxes Metric Fastening General Contracting
Pro Tip
Use this deep 6-point socket when a nut sits on a long stud or when the hardware is already showing wear. You will get better engagement than a 12-point socket, and you will spend less time fighting rounded corners.
Tool Nut’s Take
Tool Nut’s Take
Exactly the kind of single socket worth buying
The DeWalt DWMT96370OSP 1/2-In. Drive Deep 6-Point Socket 24 mm is the kind of replacement or fill-in size that makes sense because it is built around the stuff that actually matters: fit, grip, readability, and durability.
- Who it’s for: Mechanics, maintenance techs, and serious DIYers who need a 24 mm deep socket for regular service work.
- Why it stands out: Deep reach, 6-point contact, DirectTorque geometry, and hard-stamped markings make it more useful than a bargain-bin socket.
- Worth knowing: This is an individual socket, not a set piece bundle, so it is best for replacing a missing size or adding a specific metric deep socket to your current lineup.
Common Questions
- Is this a metric or SAE socket? This is a metric socket, and the size is 24 mm.
- What drive size does it use? It uses a 1/2-inch drive.
- Is this a deep socket? Yes. It is a deep 6-point socket.
- Is this sold as a set or as a single socket? It is sold as an individual socket.
Reviews
There are no reviews yet.