Key Features
Fast, Clean Cuts The thin .045 inch kerf helps the wheel cut quickly through metal and stainless steel with less material removed, which means less drag and better control during cut-off work. Built for Angle Grinders This Diablo DBD060045701F metal cut-off disc is made for 6 inch angle grinder setups with a 7/8 inch arbor, so it fits the kind of metal cutting work many shops and jobsites handle every day. Metal and Stainless Rated for both metal and stainless steel, this wheel gives you one practical option for general fabrication, trim cuts, and cleanup work without bouncing between disc types.
Overview
The Diablo DBD060045701F Metal Cut-Off Disc is a 6 inch abrasive cut-off wheel for angle grinders. This is a metal cut-off disc designed for cutting metal and stainless steel. Model Number: DBD060045701F. If you need a wheel for fast cut-off work without stepping up to a larger setup, this size and thickness make sense for routine shop and jobsite cutting.
This disc uses a thin kerf design with a .045 inch thickness, which matters because a thinner wheel removes less material as it cuts. In real use, that usually means the disc gets into the work faster and feels less bogged down in the cut, especially when you are trimming metal stock, slicing tubing, or making quick cutoff passes on stainless.
The 6 inch diameter gives you a practical balance between reach and control on compatible angle grinders. Paired with the 7/8 inch arbor, it is built around a common grinder setup for cut-off applications. The wheel is labeled Type 27/42, which is useful when matching the disc to the grinder and guard setup you already run.
Diablo also rates this wheel for up to 10,150 RPM, so the speed capacity is clearly called out right on the disc. That is one of the first specs you should check on any cut-off wheel, because matching the accessory to the grinder’s operating speed is what keeps the setup correct and predictable.
For material range, this wheel is intended for metal cutting and stainless steel cutting. That makes it a good fit for fabrication work, maintenance crews, metal stud work, and general contractors who need a reliable abrasive wheel for cutoff tasks on ferrous stock and stainless pieces. The image data also identifies it as made in Spain.
This listing is the 25 pack version, so it is better suited to users who go through wheels regularly and want to keep consistent discs on hand instead of buying one at a time. If you run an angle grinder for repetitive cutoff work, stocking a pack like this usually makes more sense than scrambling for replacements in the middle of a job.
Thin Kerf for Efficient Cut-Off Work
When you are doing straight cut-off work, wheel thickness matters. A .045 inch disc is a practical choice when you want quicker entry into the material and less waste during the cut.
- 6 inch diameter for angle grinder cut-off applications
- .045 inch thickness with thin kerf design
- Type 27/42 wheel with 7/8 inch arbor
One Wheel for Metal and Stainless
If your work jumps between standard metal and stainless steel, this disc keeps the accessory choice simple. It is built for both materials, which is exactly what a lot of fab, install, and repair work calls for.
- Rated for metal and stainless steel cutting
- Designed for use on angle grinders
- 25 pack format suits repeat-use shops and crews
What’s in the Box
- (25) Diablo DBD060045701F 6 in. Metal Cut-Off Discs
Key Specifications
| Diameter | 6 in. (150 mm) |
|---|---|
| Thickness | 0.045 in. (1.2 mm) |
| Arbor Size | 7/8 in. (22.2 mm) |
| Wheel Type | Type 27/42 |
| Maximum Speed | 10,150 RPM |
| Material Application | Metal / Stainless Steel |
| Tool Compatibility | Angle Grinders |
| Made In | Spain |
Compatibility
Tool Type Designed for use with angle grinders. Arbor Fit Fits setups that use a 7/8 in. arbor. Wheel Size Intended for 6 in. cut-off wheel applications.
Built For
Metalworking Fabrication Construction General Contracting Stainless Steel Cutting Metal Cut-Off Work
Pro Tip
Before loading a fresh Diablo DBD060045701F wheel, check your grinder’s max RPM and confirm it does not exceed the disc’s 10,150 RPM rating. It is a simple check, but it is the one that tells you right away whether the setup is correct for that grinder.
Tool Nut’s Take
Tool Nut’s Take
Diablo DBD060045701F Metal Cut-Off Disc for Everyday Grinder Work
This is the kind of wheel that makes sense for guys who just need a straightforward, thin cut-off disc for metal and stainless without overthinking it.
- Who it’s for: Fabricators, contractors, and maintenance crews running 6 inch angle grinders for regular cut-off work.
- Why it stands out: The thin .045 inch kerf, metal and stainless rating, and clear 6 inch / 7/8 inch fitment make it easy to match to the job.
- Worth knowing: This is a 25 pack, so it is a better buy for repeat users than occasional one-off cutting.
Common Questions
- What tool is this disc designed for? It is designed for use with angle grinders.
- What materials can it cut? The disc is labeled for cutting metal and stainless steel.
- What size grinder setup does it match? It is a 6 inch disc with a 7/8 inch arbor.
- What is the maximum rated speed? The wheel is rated for up to 10,150 RPM.
Reviews
There are no reviews yet.