Key Features
Built for Grinders Made for angle grinders with a 7/8 inch arbor, so setup is straightforward and the fit matches common metal cutting setups. Thin Kerf Cut The 0.045 inch wheel thickness helps the disc move through metal with less material removal, which is what you want for faster, cleaner cut-off work. Metal and Stainless Rated for metal and stainless steel, so this cut-off wheel covers general shop work, field repairs, and fabrication without switching to a separate wheel type.
Overview
The Diablo DBD060045701F Metal Cut-Off Wheel 50 Pack is a 6 inch abrasive cut-off wheel for angle grinders. This is a metal cut-off wheel designed for cutting metal and stainless steel. Model Number: DBD060045701F. If you burn through wheels regularly in the shop or out on installs, the 50 pack format makes sense because you are stocking a consumable you already know you will use.
This Diablo metal cut-off wheel uses a thin kerf design and a 0.045 inch thickness. In real use, that matters because a thinner wheel removes less material during the cut. That typically means quicker cut-off work, less drag, and less heat than a thicker wheel when you are slicing tubing, flat stock, or other common metal pieces with an angle grinder.
The 6 inch diameter gives you a useful balance between reach and control for grinder-based cutting tasks. Paired with the 7/8 inch arbor size, this wheel is aimed at standard angle grinder setups that need a disc made specifically for cut-off work instead of grinding or flap disc use. The Type 27 profile also tells you this is built for the angle grinder category shown right on the wheel.
Diablo marks this wheel for metal and stainless applications, which makes it a practical choice for users who move between general steel and stainless jobs. That saves time on the cart and in the truck because you are not trying to keep separate cut-off wheels for every small material change when the job keeps moving.
The maximum speed rating of 10,150 RPM is one of the numbers that matters most with an abrasive wheel. It tells you the wheel is intended for grinder setups that stay within that operating range. Match the wheel correctly to the tool, and you get the performance and safety margin this kind of accessory is built around.
This Diablo DBD060045701F Metal Cut-Off Wheel 50 Pack is a good fit for metalworking, fabrication, maintenance work, mechanical trades, and contractors who cut metal often enough that buying single discs stops making sense. If you need a thin cut-off disc for angle grinder metal cutting and you want shelf stock ready to go, this pack is the practical play.
Stock Up for Repeated Metal Cutting
If you are cutting metal often, the biggest time saver is having the right wheel on hand before one wears out. This pack gives you repeatable sizing and application coverage for metal and stainless work on compatible angle grinders.
- 6 inch diameter wheel for angle grinder cut-off tasks
- 0.045 inch thin kerf design for fast, efficient material removal
- Marked for metal and stainless steel applications
What’s in the Box
- (50) Diablo DBD060045701F 6 inch metal cut-off wheels
Key Specifications
| Diameter | 6 in. (150 mm) |
|---|---|
| Thickness | 0.045 in. (1.2 mm) |
| Arbor Size | 7/8 in. (22.2 mm) |
| Maximum Speed | 10,150 RPM |
| Wheel Type | Type 27 |
| Abrasive Spec | A60 R BF INOX |
| Application | Metal / Stainless Steel |
| Made In | Spain |
Compatibility
Tool Fit Designed for angle grinders. Arbor Interface Fits setups using a 7/8 inch arbor.
Built For
Metalworking Fabrication Maintenance General Contracting Stainless Steel Cutting Angle Grinder Cut-Off Work
Pro Tip
With a 0.045 inch cut-off wheel like this, let the wheel do the work. If you lean on it too hard in thicker metal, you wear the disc faster and make the cut rougher than it needs to be.
Tool Nut’s Take
Tool Nut’s Take
Diablo DBD060045701F Metal Cut-Off Wheel 50 Pack for crews that actually go through discs
This is the kind of consumable buy that makes more sense the busier your metal cutting work gets.
- Who it’s for: Fabricators, maintenance techs, welders, and contractors running angle grinders for regular metal and stainless cut-off jobs.
- Why it stands out: The 6 inch size, thin 0.045 inch kerf, and metal/stainless rating make it a practical everyday wheel instead of a niche accessory.
- Worth knowing: This is a cut-off wheel, not a general grinding wheel, so match it to the right job and keep your grinder speed within the listed 10,150 RPM maximum.
Common Questions
- What tool is this wheel designed for? It is designed for use with angle grinders.
- What materials is it intended to cut? The wheel is marked for metal and stainless steel.
- What size arbor does it use? It uses a 7/8 inch arbor, also listed as 22.2 mm.
- What is the maximum rated speed? The wheel is rated for up to 10,150 RPM.
Reviews
There are no reviews yet.