Key Features
Built for Clean Laminate CutsThis Festool laminate saw blade is made for laminate and melamine-resin-bonded panels where chipped edges ruin the job. The 52-tooth configuration is aimed at cleaner, more controlled finish cuts. Carbide for Longer Service LifeFestool calls out updated carbide and tooth geometry for faster work and longer usable life. That matters when you are cutting abrasive sheet materials that wear out standard blades quickly. Track Saw Specific FitDesigned for Festool TS 55 and select TSC 55 track saw applications, this blade matches the 160 mm diameter and 20 mm arbor used in that platform. Fit matters here, and so does the model-year note on TSC 55 compatibility.
Overview
The Festool 205562 HW 160×1,8×20 TF52 L Laminate Saw Blade for TS 55 / TSC 55 is a purpose-built laminate saw blade for Festool track saws. This is a laminate saw blade designed for clean cutting in laminate and melamine-resin-bonded panels. Model Number: 205562. If you are cutting finished sheet goods where edge quality matters, this blade is the right kind of upgrade because it is built around cleaner results, longer life, and proper fit on the intended Festool saw platform.
The big story here is cut quality in demanding surface materials. Laminate, melamine, and similar panel products are hard on blades and quick to show tear-out or chipping. Festool states that the new saw blade geometry helps users work faster and for longer, with tooth shapes that improve cutting performance and carbide that extends service life while keeping cut quality consistent. In plain terms, that means fewer rough edges, less fighting the material, and less downtime swapping out a tired blade.
The blade dimensions are part of why this matters. With a 160 mm diameter, 1.8 mm kerf, 20 mm arbor, and 52 teeth, this blade is clearly tuned for fine-finish panel work rather than rough framing cuts. That tooth count supports smoother cutting action in coated and brittle surfaces, and the thin kerf helps balance clean results with efficient cutting. For cabinet parts, built-ins, closet components, and finished panels, those details directly affect how much cleanup you have after the cut.
This blade is also specific about platform fit. It is intended for the Festool TS 55 and TSC 55, but Festool explicitly notes that it is not compatible with TSC 55 models manufactured before 2021, TS 55 EQ, or TS 55 REQ track saws. That is worth paying attention to before you order. Saw blades are not a place to guess, and Festool has already done the hard part by spelling out where this blade should and should not be used.
From a practical jobsite standpoint, this is the blade you keep around when finished surfaces are on the line. If you are a cabinet installer, finish carpenter, remodeler, or serious woodworker cutting laminate-faced material, this is the kind of accessory that helps the saw perform the way it should in high-visibility work. It is less about raw speed and more about getting a clean, usable edge right off the saw.
Bottom line: this blade makes the most sense for users already in the Festool track saw system who regularly cut laminate and melamine-based sheet goods. If your work involves visible surfaces, expensive panels, or materials that chip easily, the Festool 205562 is the specialized blade that earns its keep fast.
Cleaner Edges on Finished Panels
When you are cutting laminate-faced or melamine-coated panels, the blade matters as much as the saw. This one is built to help reduce chipping and keep the cut line cleaner in materials that show every mistake.
- 52-tooth layout aimed at fine-finish sheet goods and panel cutting
- Festool states updated tooth geometry improves cutting performance and consistency
- Made for laminate and melamine-resin-bonded panels such as Trespa
Key Specifications
| Tool Type | Laminate Saw Blade |
|---|---|
| Model Number | 205562 |
| Blade Diameter | 160 mm |
| Kerf | 1.8 mm |
| Arbor Size | 20 mm |
| Tooth Count | 52 |
| Material Application | Laminate and melamine-resin-bonded panels |
| Weight | 0.6 lb |
Compatibility
Compatible Saws Designed for Festool TS 55 and select Festool TSC 55 track saw applications. Blade Interface 160 mm blade diameter with 20 mm arbor bore. Not Compatible With Not compatible with TSC 55 models manufactured before 2021, TS 55 EQ, or TS 55 REQ track saws.
Built For
Cabinet InstallationFinish CarpentryRemodelingWoodworkingLaminate Panel CuttingMelamine Sheet Goods
Tool Nut’s Take
Tool Nut’s Take
Festool 205562 HW 160×1,8×20 TF52 L Laminate Saw Blade for TS 55 / TSC 55 is the right blade when the edge actually matters
This is the blade you buy when cheaping out on finish quality costs more than the blade does.
- Who it’s for: Festool track saw users cutting laminate, melamine, and other finish-sensitive panel materials.
- Why it stands out: It is purpose-built for cleaner panel cuts, with a 52-tooth layout and Festool’s updated tooth geometry and carbide for better performance over time.
- Worth knowing: Check your saw model before ordering because this blade is not compatible with pre-2021 TSC 55 models, TS 55 EQ, or TS 55 REQ saws.
Common Questions
- What materials is this blade made for? It is intended for laminate and melamine-resin-bonded panels, including materials such as Trespa.
- What saws does this blade fit? It is designed for Festool TS 55 and select TSC 55 applications, using a 160 mm diameter and 20 mm arbor.
- Will it fit every TSC 55 or TS 55 saw? No. Festool states it is not compatible with TSC 55 models manufactured before 2021, TS 55 EQ, or TS 55 REQ track saws.
- How many teeth does the blade have? This blade has 52 teeth.
Reviews
There are no reviews yet.