Key Features
306 Tenons OrganizedYou get a broad mix of 8 mm and 10 mm DOMINO XL tenons in one Systainer, so the right size is already on hand instead of buried in loose boxes. Ready for DF 700The Festool DS/XL D8/D10 306 BU DOMINO Assortment includes the 8 mm and 10 mm cutters for the DF 700, which gets you straight to joinery instead of ordering parts separately. Stronger AlignmentFestool’s flat floating tenon shape resists rotation and helps keep parts flush during glue-up, which matters on furniture, cabinet parts, casing, and frame work.
Overview
Festool DS/XL D8/D10 306 BU DOMINO Assortment is a joinery accessory kit built around Festool’s DOMINO XL system. This is a DOMINO assortment designed for loose tenon joinery in medium- to large-scale woodworking projects. Model Number 576791. If you run a Festool DF 700, this kit gives you the tenon sizes and cutters that cover a lot of real furniture, cabinet, casing, and frame work without piecing the setup together one box at a time.
The big advantage here is speed and organization. Instead of buying tenons in separate packs and keeping cutters somewhere else, this assortment puts the commonly used 8 mm and 10 mm DOMINO XL sizes in one Systainer with divided storage. That means quicker setup at the bench or on site, faster size changes, and less time hunting for the right joinery stock when you are in the middle of a glue-up.
Festool’s DOMINO tenons are built as true floating tenons for mortise-and-tenon work. The flat elongated shape helps prevent rotation, which is one of the reasons the system aligns parts so well during edge and face gluing. Festool also calls out the glue pockets and longitudinal grooves, which help spread glue more evenly and give excess glue somewhere to go instead of hydraulic-locking the joint.
This assortment is aimed at the DF 700, so it fits the larger end of the DOMINO workflow. The included 8 mm and 10 mm cutters make that clear. If you are building bigger doors, tables, beds, casework components, frames, or other heavier assemblies, these sizes make more sense than the smaller tenons used in lighter joinery. It is a practical kit for shops that already rely on the DOMINO XL and want the core sizes close at hand.
The storage side matters more than it sounds. The included Systainer has three compartments and removable bins, so you can sort by tenon size and length and keep things readable. On a real job, that reduces mix-ups and keeps the workflow moving. In a shop, it makes inventory easier because you can see what size is running low before you start the next project.
Festool positions these hardwood tenons for both plywood and solid wood applications, and the system is built around clean alignment and repeatable assembly. That makes this assortment a good fit for cabinetmakers, furniture builders, trim carpenters, and serious woodworkers who want stronger, more predictable loose tenon joints with less setup friction. If you already own the DF 700, this is one of the cleaner ways to keep the most useful 8 mm and 10 mm joinery sizes together in one case.
Keep Joinery Sizes Sorted and Ready
This kit is about keeping the core DOMINO XL consumables in one place so you can work instead of organize. The Systainer layout makes it easy to grab the right length and diameter fast.
- Includes a Systainer with divided storage for multiple tenon sizes and lengths
- Comes with the 8 mm and 10 mm DF 700 cutters needed to start routing right away
Built for Strong, Accurate Mortise-and-Tenon Work
The DOMINO shape is the real selling point. It helps keep parts from twisting in the joint and makes alignment easier during assembly, especially on larger workpieces.
- Flat floating tenon design helps prevent rotation in the mortise
- Good fit for furniture, cabinetmaking, casing, and frame work
Glue-Up Goes Together Cleaner
Festool machines these tenons with glue pockets and grooves so glue spreads better and excess has room to escape. That makes assembly more forgiving and helps avoid a messy, overpressurized joint.
- Embossed glue pockets help distribute adhesive through the mortise
- Chamfered ends make insertion easier during assembly
Better Fit for Larger-Scale Joinery
Because this assortment centers on 8 mm and 10 mm tenons for the DF 700, it makes the most sense for heavier assemblies where small joinery is not enough. It is a solid match for larger furniture parts and structural wood joinery details.
- Designed for use with the Festool DF 700 DOMINO joiner
- Includes both 50 mm, 80 mm, and 100 mm tenon lengths in each diameter range
What’s in the Box
- (50) DOMINO dowels 8 x 50 mm
- (36) DOMINO dowels 8 x 80 mm
- (36) DOMINO dowels 8 x 100 mm
- (80) DOMINO dowels 10 x 50 mm
- (52) DOMINO dowels 10 x 80 mm
- (52) DOMINO dowels 10 x 100 mm
- (1) DOMINO Cutter D 8-NL 50 HW-DF 700
- (1) DOMINO Cutter D 10-NL 70 HW-DF 700
- (1) Systainer3 SORT-SYS3 M 187 DOMINO
Key Specifications
| Tool Type | DOMINO assortment |
|---|---|
| Compatibility | Festool DF 700 |
| Total Tenon Count | 306 pieces |
| Tenon Diameter Range | 8 mm and 10 mm |
| Tenon Lengths Included | 50 mm, 80 mm, 100 mm |
| Included Cutters | 2 cutters |
| Storage Case | Systainer3 SORT-SYS3 M 187 DOMINO |
| Weight | 12.63 lbs |
Compatibility
DOMINO Joiner Suitable for the Festool DF 700 DOMINO joiner. Cutter Sizes Includes DF 700 cutters for 8 mm and 10 mm DOMINO XL joinery. Material Use Intended for loose tenon joinery in plywood and solid wood applications.
Built For
CabinetmakingFurniture BuildingWoodworkingTrim and Casing WorkFrame ConstructionShop Joinery
Pro Tip
Leave each tenon size in its own removable bin and label what you use most often. On a DF 700 setup, that saves a surprising amount of time during repeated glue-ups because you are not sorting mixed loose tenons at the bench.
Warranty & Support
No manufacturer’s warranty is listed for this assortment.
Tool Nut’s Take
Tool Nut’s Take
Festool DS/XL D8/D10 306 BU DOMINO Assortment for Shops That Want Less Guesswork
This is the kind of kit that makes a DF 700 owner faster because the right tenons and the right cutters are already packed together and ready to go.
- Who it’s for: Woodworkers, cabinet shops, furniture builders, and trim carpenters already using the Festool DF 700 for larger loose tenon joinery.
- Why it stands out: You get the core 8 mm and 10 mm DOMINO XL sizes, two matching cutters, and a Systainer that keeps everything organized instead of scattered across the shop.
- Worth knowing: This is not a stand-alone joiner. It is an accessory assortment built around the DF 700 platform, so it makes the most sense if you already own that machine.
Common Questions
- What tool is this assortment made for? It is suitable for the Festool DF 700 DOMINO joiner.
- What tenon sizes are included? This assortment includes 8 mm and 10 mm DOMINO XL tenons in 50 mm, 80 mm, and 100 mm lengths.
- Are cutters included? Yes. The kit includes two cutters: one 8 mm cutter and one 10 mm cutter for the DF 700.
- What kind of work is it intended for? Festool positions it for mortise-and-tenon applications such as furniture, cabinetmaking, casing, and frame work in plywood and solid wood.
Reviews
There are no reviews yet.