Key Features
Track Saw ReadyBuilt around a 55 inch Festool guide rail, this kit gives your track saw a straight, repeatable cutting setup without piecing together parts one at a time. Cleaner Repeat CutsThe angle stop, guide extension, limit stop, and rail connectors help with consistent sizing and angle work, which matters when you are making repeat cuts instead of one-off trim jobs. Stored and ProtectedA Systainer keeps the hardware organized, and the included tote bag protects the 55 inch rail during transport so it is easier to keep the whole cutting setup together.
Overview
The Festool 577157 Guide Rail Accessory Kit With 55-in Guide Rail, Guide Extension And Tote Bag is a guide rail accessory kit for Festool cutting systems. This is a guide rail accessory kit designed for straight cutting, repeatable angle setup, and better guide rail handling with track saw, router, or jigsaw applications. Model Number: 577157. If you already work with Festool rails or want to start with the core accessories in one package, this kit saves time by bundling the pieces that actually improve setup, accuracy, and transport.
The heart of the kit is the Festool FS 1400/2 55 inch guide rail. Festool rails are built to let you bring the tool to the material instead of dragging sheet goods or long workpieces across stationary equipment. That matters on jobsites, in remodel work, and in smaller shops where moving a full panel to a table saw is not always practical. The integrated splinterguard helps you line up the cut and reduce tear-out, while the non-skid strips underneath help hold position during setup and cutting.
What makes this package more useful than a rail by itself is the accessory side. You get an angle stop that attaches to the guide rail without tools and sets from -60 degrees to +60 degrees, along with the FS-WA-VL guide extension for repeat sizing. Festool lists the guide extension for workpiece widths from 447 to 1,150 mm, so this setup is built for users who need more than a straight line. It is meant for repeatable layout, not just occasional freehand measuring.
The included limit stop adds a practical safety and workflow benefit. It can be used as a start and stop reference, and Festool also notes that it helps protect the circular saw user against kickback when plunging into the workpiece. That is the kind of small accessory that sounds minor until you start making repetitive plunge cuts and want a more controlled, predictable starting point.
You also get two FSV/2 rail connectors, which let you connect and align multiple guide rails for longer cuts. That expands the system beyond the included 55 inch rail and makes this kit more adaptable for long rips, larger panels, or shop work where one rail length is not enough. Festool also calls out compatibility with clamps, and this kit includes two fastening clamps for securing the rail or workpiece when you need extra hold.
Jobsite practicality is handled well here. The deflector keeps the suction hose and cable from catching at the end of the guide rail, which is one of those details that helps the cut go smoother in the real world. The Systainer keeps the smaller accessories organized and easy to find, and the tote bag is sized for up to two 55 inch or shorter guide rails, giving the rail itself some protection during storage and transport.
Compatibility is one of the strongest reasons to buy this kit. Festool states the rail can be used with a track saw, router, or jigsaw. So this is not just a track saw add-on. It is part of the broader Festool guide rail platform, and it is especially useful for users already invested in Festool rail-guided cutting and routing setups.
Who should buy it? This kit makes the most sense for cabinet installers, finish carpenters, remodelers, millwork shops, and serious DIY users who want a more complete Festool guide rail setup from the start. If you only need a single rail and nothing else, it may be more kit than you need. But if you want better control, repeatability, rail expansion, and cleaner transport, this bundle covers the parts most users end up adding anyway.
Festool 577157 Guide Rail Accessory Kit for Accurate Rail Setup
This setup is about getting the rail positioned where you want it and keeping it there. The included clamps, angle stop, and guide extension help turn the guide rail from a simple straightedge into a more repeatable cutting system.
- Angle stop attaches to the guide rail without tools
- Angle range is -60 degrees to +60 degrees
- Guide extension supports repeat sizing for workpiece widths from 447 to 1,150 mm
Get Cleaner Cuts on Sheet Goods and Trim Parts
The included FS 1400/2 55 inch guide rail is the part you will use every time. It is designed to give a straight reference line with splinter control, which is exactly what you want when cutting plywood, panels, and finished material.
- Includes one FS 1400/2 55 inch guide rail
- Integrated splinterguard helps line up cuts and reduce tear-out
- Non-skid strips under the rail help prevent shifting during setup and cutting
Expand Beyond a Single Rail
If longer cuts are part of your work, this kit is already thinking ahead. The included rail connectors let you join and align guide rails, so the setup can grow with the jobs you take on.
- Includes two FSV/2 connectors for joining guide rails
- Festool guide rails can be connected for longer cutting capacity
- Works with track saw, router, or jigsaw guide rail applications
Protect the Rail Between Jobs
Guide rails do their best work when the edges stay straight and clean. The included tote bag makes it easier to carry the rail and gives it some protection on the truck, in the trailer, or moving around the shop.
- Tote bag fits up to two 55 inch or shorter guide rails
- Helps protect guide rails during transport and storage
- Systainer keeps the smaller accessories organized separately
What’s in the Box
- (1) FS-WA Angle Stop
- (2) FSV/2 Connectors
- (1) FS/2-AW Deflector
- (2) Fastening clamps / screw clamps, 4-11/16 in
- (1) Limit Stop
- (1) SW 5 / SW 3 combination hex key
- (1) Systainer SYS3 M 137
- (1) Guide Rail FS 1400 55 in (491498)
- (1) Guide Rail Tote Bag for 55 in Rails (466357)
- (1) Guide Extension FS-WA-VL (577041)
Key Specifications
| Product Type | Guide Rail Accessory Kit |
|---|---|
| Guide Rail Length | 55 in |
| Angle Range | -60° to +60° |
| Workpiece Width Capacity | 447 – 1,150 mm |
| Clamp Size | 4-11/16 in |
| Rail Connector Quantity | 2 |
| Rail Bag Capacity | Up to two 55 in or shorter guide rails |
| Weight | 19.7 lb |
Compatibility
Tool CompatibilityFestool states the guide rail can be used with a track saw, router, or jigsaw. Guide Rail SystemThe included FSV/2 connectors allow multiple Festool guide rails to be connected and aligned for longer cuts. Angle Stop SetupThe FS-WA-VL guide extension is used with the FS-WA angle stop for repeat-width cutting setup. Clamp and Rail UseThe 55 inch rail is compatible with clamps, and this kit includes fastening clamps to secure the setup.
Built For
Cabinet Installation Finish Carpentry Remodeling Woodworking Sheet Goods Cutting Repeat Angle Cuts Track Saw Fastening Jobsite Transport
Pro Tip
If you are using the angle stop and guide extension for repeat parts, take a minute to dial in your stop from a test piece before running finished stock. Once it is set, this kit is much faster than remeasuring every panel or trim part by hand.
At a Glance
55 inGuide Rail Length -60° to +60°Angle Range 447 – 1,150 mmWorkpiece Widths 19.7 lbKit Weight
Tool Nut’s Take
Tool Nut’s Take
Buy the system once, not piece by piece
The Festool 577157 Guide Rail Accessory Kit With 55-in Guide Rail, Guide Extension And Tote Bag makes a lot of sense for users who know a plain rail is only the starting point.
- Who it’s for: Track saw users, cabinet installers, finish carpenters, and woodworkers who want straighter cuts, repeatable setups, and better rail handling.
- Why it stands out: You are getting the 55 inch rail, the angle and repeat-cut accessories, the rail connectors, clamps, Systainer, and transport bag in one package instead of chasing parts later.
- Worth knowing: This is a strong fit if you are invested in the Festool guide rail platform. If you only need a single rail and never use angle or repeat stops, it may be more kit than you need.
Common Questions
- What tools can use this guide rail system? Festool lists the included guide rail for use with a track saw, router, or jigsaw.
- Can this setup handle repeat-width cuts? Yes. The FS-WA-VL guide extension is used with the angle stop and supports workpiece widths from 447 to 1,150 mm.
- Can the rail system be expanded for longer cuts? Yes. The included FSV/2 connectors allow guide rails to be connected and aligned for longer cutting applications.
- Does the rail bag hold more than one rail? Yes. Festool states the tote bag fits up to two 55 inch or shorter guide rails.
Reviews
There are no reviews yet.