Key Features
Tool And Hardware TogetherThe Festool 577766 SYS3-COMBI M 287 Systainer gives you one place for the main tool up top and the smaller parts below. That means less time digging through separate cases for screws, anchors, dowels, and bits. Front Drawer AccessThe lower drawer stays accessible even when the unit is stacked in a Systainer tower. That is a real time-saver when you need fasteners or small parts without unpacking the whole setup. Built Into The SystemIt connects with the Festool Systainer system and works with transport options like the SYS-RB roll board and SYS-Roll trolley. If you already run Festool storage, this drops right into the workflow.
Overview
The Festool 577766 SYS3-COMBI M 287 Systainer is a modular storage case built to carry tools in the main compartment and small parts in a pull-out drawer below. This is a Systainer designed for simple, compact transport of tools and accessories. Model Number 577766. It is aimed at tradespeople and organized serious DIY users who want one grab-and-go storage solution instead of a separate case for the tool and another bin for hardware.
What makes this setup useful on the job is the split layout. The upper section gives you room for power tools or hand tools, while the lower drawer keeps the related accessories in view and easy to sort. Festool calls out nails, dowels, and screws specifically, and that is exactly the kind of stuff that slows you down when it is loose in the bottom of a box. Keeping the tool on top and the install hardware below is the practical part here.
The drawer is one of the main reasons to buy this model over a standard storage case. You get constant access to the front drawer even when the Systainer is part of a stack. That matters in a van, in a shop, or on a punch-list job where you are moving fast and only need a handful of anchors or screws. Instead of unstacking everything, you pull the drawer and keep working.
Festool also built in flexibility for how you organize the lower section. The drawer can be divided with the included partitions, and it is also compatible with separately available plastic containers in the drawer. That gives you a cleaner way to separate small hardware by size or task. If you are the kind of user who wants drill and driver bits, specialty fasteners, and install consumables all sorted, this system makes sense fast.
In terms of size, the SYS3-COMBI M 287 sits in the Festool Systainer ecosystem with outside dimensions listed at 396 mm long x 296 mm wide x 287 mm high. Festool and Acme both point to a top compartment and a dedicated drawer below, with internal dimensions provided for each section. The top compartment measures 389 mm x 287 mm x 140 mm, and the drawer measures 343 mm x 271 mm x 66 mm. Those numbers matter because they tell you this is not just a parts organizer. It is meant to carry an actual tool plus the accessories that go with it.
Jobsite mobility is another strong point. The Festool 577766 SYS3-COMBI M 287 Systainer is compatible with the full Festool Systainer system, so it connects easily with other Systainers and related system accessories. Festool also notes compatibility with mobile dust extractors and integration with bott vario3 vehicle equipment. If your storage lives in a van one day and a workshop shelf the next, that system fit is a big deal.
Load ratings are solid for a storage product in this class. Acme lists a connected load capacity of 40 kg and a permitted lid load of 100 kg. That tells you this case is built to be stacked and used as part of a real working storage setup, not babied on a shelf. Product weight without accessories is listed at 4.3 kg, with web data also showing approximately 7.9 lb product weight.
Who should buy it? Contractors, installers, service techs, cabinet guys, finish carpenters, electricians, and anyone already invested in Festool storage will get the most out of it. If you regularly carry a drill, driver, oscillating tool, or install kit along with a bunch of small parts, this is one of the cleaner ways to stay organized without dragging around two separate boxes.
Keep The Tool Up Top And The Hardware Below
This layout is the whole point of the Combi design. You can store the main tool in the upper compartment and keep the related fasteners or accessories below, so the setup stays compact and easier to carry from the van to the work area.
- Top compartment is sized for tool storage, not just loose accessories
- Designed to keep tools and install hardware in one Systainer
Grab Small Parts Without Unstacking Everything
The front drawer stays accessible even when the case is in a Systainer tower. That saves time during installation work because you can reach the parts you need without breaking down the stack.
- Drawer can be divided with partitions for cleaner organization
- Good fit for screws, dowels, anchors, and other small consumables
Festool 577766 SYS3-COMBI M 287 Systainer Fits The Larger System
If you already use Festool Systainers, this is an easy add. It is built to connect with the broader Systainer platform, which makes transport, stacking, and vehicle organization a lot more straightforward.
- Compatible with the entire Festool Systainer system
- Works with SYS-RB roll board, SYS-Roll trolley, and bott vario3 vehicle equipment
What’s in the Box
- (1) Festool SYS3-COMBI M 287 Systainer
- (2) Long Partitions
- (3) Short Partitions
- (1) Cover for Label Field
Plastic containers for the drawer are sold separately.
Key Specifications
| Tool Type | Systainer |
|---|---|
| External Dimensions | 396 mm L x 296 mm W x 287 mm H |
| Top Compartment Internal Dimensions | 389 mm L x 287 mm W x 140 mm H |
| Drawer Internal Dimensions | 343 mm L x 271 mm W x 66 mm H |
| Connected Load Capacity | 40 kg |
| Permitted Lid Load | 100 kg |
| Weight | 4.3 kg without accessories |
| UPC | 4014549419830 |
Compatibility
Systainer PlatformCompatible with the entire Festool Systainer system and previous Systainer generations for easy stacking and transport. Transport OptionsWorks with the Festool SYS-RB roll board and SYS-Roll transport trolley. Drawer OrganizersCompatible with plastic containers 204858, 204859, 204860, and 204861 in the drawer, and with plastic container set 50×50/50x100x68 (578056). Not CompatibleNot compatible with plastic container set 60×60/120×71 3xFT (201124). Workshop And Van SetupCompatible with mobile dust extractors and can be integrated into bott vario3 vehicle equipment.
Built For
Construction General Contracting Remodeling Electrical HVAC Carpentry Service And Install Work Workshop Organization
Warranty & Support
No manufacturer’s warranty is listed for this product in the provided product data.
Tool Nut’s Take
Tool Nut’s Take
One Box, Less Hunting
The Festool 577766 SYS3-COMBI M 287 Systainer is the kind of storage upgrade that pays off every time you stop wasting minutes looking for the little stuff.
- Who it’s for: Pros and organized DIY users who carry a tool plus small parts and want both in one modular case.
- Why it stands out: The top-and-drawer layout is more useful than a plain box, and the front drawer access in a stacked setup is the real winner.
- Worth knowing: This is a storage system piece, not a loaded kit. The drawer partitions are included, but the optional plastic containers are separate.
Common Questions
- What is the Festool 577766 SYS3-COMBI M 287 Systainer designed to store? It is designed to store power tools or hand tools in the top compartment and related accessories or small parts in the drawer below.
- Can you open the drawer when the Systainer is stacked? Yes. Festool states that the front drawer remains accessible even in a Systainer tower.
- Is it compatible with other Festool storage products? Yes. It is compatible with the Festool Systainer system, previous Systainer generations, mobile dust extractors, and transport options like the SYS-RB and SYS-Roll.
- Are all Festool drawer container sets compatible? No. The provided data specifically notes that plastic container set 60×60/120×71 3xFT (201124) is not compatible.
Reviews
There are no reviews yet.