Key Features
Six Grits, One BoxYou get 60 sanding discs total, with 10 discs each in P60, P80, P120, P180, P220, and P320. That gives you a clean path from stock removal to finish sanding without piecing together separate packs. Cleaner SandingFestool’s MULTI-JETSTREAM 2 layout with 49-hole extraction helps pull dust away from the surface. Less dust on the disc means less clogging and more consistent sanding. Built for Festool SandersThe Festool 578166 D150 6-Inch Granat Abrasives 60/80/120/180/220/320-Grit 60-Piece Starter Set is sized for 6 inch Festool sanders. If you want one kit that covers prep, intermediate sanding, and finish work, this is the easy starting point.
Overview
The Festool 578166 D150 6-Inch Granat Abrasives 60/80/120/180/220/320-Grit 60-Piece Starter Set is a 6 inch sanding disc assortment built for Festool random orbit sanders and finish sanding work. This is a sanding disc starter set designed for surface preparation, paint work, filler sanding, and fine finish sanding. Model Number 578166. If you want one box that lets you move from heavier stock removal into finer surface prep without guessing at grit selection, this set does that cleanly.
What makes this set useful is the spread of grits. With 10 discs each in P60, P80, P120, P180, P220, and P320, it covers the common steps most painters, finish carpenters, woodworkers, and remodelers actually use. The coarse discs help with repair compound, filler, and harder surface prep. The middle grits help refine the surface. The finer grits are there when you’re getting ready for topcoat work or dialing in a cleaner finish on paint, plastic, acrylic, and similar materials.
Festool builds these as Granat abrasives, and that matters if you work with modern coatings. These discs are specifically suited to VOC varnishes and hard substrates, which is where lesser abrasives can load up fast and stop cutting. The special coating is there to reduce clogging and stretch disc life, so you spend more time sanding and less time swapping discs that have packed up too early.
Dust control is another big part of the story here. The MULTI-JETSTREAM 2 design with 49-hole extraction is meant to support low-dust sanding when paired with the right sander and dust extraction setup. That helps protect the surface from loose abrasive dust getting trapped under the disc, and it also makes the job more manageable when you’re sanding filler, paint systems, plastics, or mineral materials indoors.
From a practical standpoint, this is a smart buy for anyone getting into the Festool 150 mm platform or anyone who wants a ready-to-go abrasive mix on hand. Instead of buying six separate boxes just to test what works best on your workflow, you get a broad sampling in one package. That makes it a good fit for shops that handle changing materials from one job to the next.
Compatibility is straightforward. This set is suitable for Festool ES 150, ETS 150, ETSC 2 150, ETS EC 150, LEX 150, and HSK-D 150 sanders. If your work regularly includes modern paint systems, VOC clear coats, hard sublayers, fillers, plastics, and fine surface prep, this is the kind of abrasive kit that earns a place on the shelf because it covers real-world sanding steps without overcomplicating the decision.
Start with the Right Grit
This set makes grit selection simple. You can step through rough prep, surface refinement, and finish-ready sanding with one matched abrasive family instead of mixing random discs from different boxes.
- Includes 10 discs each in P60, P80, P120, P180, P220, and P320
- Good coverage for filler, varnish, hard base layers, plastics, acrylic, and repair compounds
Keep Dust and Clogging Down
Dust-packed abrasives stop cutting well and can leave a mess on the surface. Festool’s hole pattern and coating are built to keep the discs working longer and support cleaner sanding when used with extraction.
- MULTI-JETSTREAM 2 layout with 49-hole extraction
- Special coating helps reduce clogging and extend service life
A Smart Fit for Finish Work
If you do paint correction, clear coat prep, filler sanding, or finish surface work, this assortment is a practical way to keep the most-used grits together. It is especially well suited to shops working across wood, coatings, and synthetic materials.
- Specially suited to VOC varnishes and hard substrates
- Useful for painters, varnishers, joiners, and general finish prep work
What’s in the Box
- (10) Granat sanding discs, D150, P60
- (10) Granat sanding discs, D150, P80
- (10) Granat sanding discs, D150, P120
- (10) Granat sanding discs, D150, P180
- (10) Granat sanding discs, D150, P220
- (10) Granat sanding discs, D150, P320
Key Specifications
| Disc Diameter | 6 in (150 mm) |
|---|---|
| Grit Range | P60 / P80 / P120 / P180 / P220 / P320 |
| Abrasive Quality | Granat |
| Piece Count | 60 discs |
| Extraction Pattern | 49-hole |
| System | MULTI-JETSTREAM 2 |
| Weight | 1.8 lbs |
| Certification | FSC certified |
Compatibility
Sander Fitment Suitable for Festool ES 150, ETS 150, ETSC 2 150, ETS EC 150, LEX 150, and HSK-D 150 sanders. Disc Size 6 inch, 150 mm format for compatible Festool sanding platforms.
Built For
PaintingWoodworkingFinish CarpentryRemodelingSurface PreparationVOC Clear CoatsFiller and Repair Compound SandingPlastics and Acrylic
Pro Tip
Use these discs with a compatible Festool sander and dust extraction setup so the 49-hole MULTI-JETSTREAM 2 pattern can do its job. That helps the abrasive stay cleaner, cut more consistently, and leaves less loose dust on the surface between grit changes.
Warranty & Support
No manufacturer’s warranty listed.
Tool Nut’s Take
Tool Nut’s Take
Festool 578166 D150 6-Inch Granat Abrasives 60/80/120/180/220/320-Grit 60-Piece Starter Set covers the sanding steps most shops actually need
This is the easy pick for anyone running a 150 mm Festool sander and wanting a well-rounded abrasive mix without buying six full boxes first.
- Who it’s for: Painters, finish carpenters, woodworkers, and remodelers doing filler work, coating prep, and finish sanding on mixed materials.
- Why it stands out: The grit spread makes sense, the Granat line is made for demanding coating work, and the 49-hole extraction setup is a real benefit when you’re trying to keep the surface and the shop cleaner.
- Worth knowing: This is an abrasive starter set, not a bulk refill. It is great for dialing in your workflow or stocking common grits, but if you burn through one grit heavily, you will still want dedicated refill packs.
Common Questions
- What grit sizes are included? The set includes P60, P80, P120, P180, P220, and P320, with 10 discs in each grit.
- What size are the discs? These are 6 inch sanding discs, also listed as 150 mm diameter.
- What sanders does this set fit? Festool lists it as suitable for ES 150, ETS 150, ETSC 2 150, ETS EC 150, LEX 150, and HSK-D 150 sanders.
- What materials is it suited for? It is intended for modern paint systems, VOC clear coats, hard sublayers, plastics, mineral materials, acrylic, repair compounds, fillers, and similar finish-prep applications.
Reviews
There are no reviews yet.