Key Features
Five Grit StagesYou get 100 GRANAT sanding discs split across P60, P80, P120, P180, and P220. That gives you a practical progression from stock removal to finish sanding without buying separate packs right away. Organized in a SystainerThe compartment layout keeps each grit separated, easy to spot, and easy to refill. That means less digging through loose discs and less wasted time when you need to jump from shaping to finish work. Built for 125 mm SandersThis Festool abrasive set is made for 5 inch, 125 mm disc sanders including ES 125, ETS 125, ETSC 125, ETSC 2 125, and ETS EC 125. If you already run one of those sanders, this is a straightforward way to stay stocked and ready.
Overview
The Festool 578193 Granat D125 Abrasives 100-Piece Value Set Systainer3 is a 5 inch abrasive disc assortment packed in a SYS3 M 112 Systainer for storage, transport, and quick grit changes. This is a sanding disc set designed for surface preparation and finish sanding across painted surfaces, hard substrates, plastics, acrylic, fillers, and repair compounds. Model Number: 578193. If you use a compatible Festool 125 mm sander and want a clean starting lineup of discs instead of piecing together separate boxes, this set makes sense.
What matters here is the grit spread. You get 20 discs each in P60, P80, P120, P180, and P220, so you can move from heavier material removal into intermediate smoothing and final finish work with one case. For a painter, finisher, or woodworker, that means less guessing about what to order first and fewer interruptions when a job changes halfway through.
The abrasive itself is Festool GRANAT, which is built for modern paint systems, VOC clear coats, and hard substrates. Festool also calls out the coating for clog resistance, and that matters because loaded paper stops cutting, runs hotter, and gets thrown away sooner. A disc that stays open longer gives you more usable sanding time and more consistent surface quality.
The case is more than packaging. The SYS3 M 112 layout keeps each grit in its own compartment, so you can see what is left at a glance and grab the next step fast. That is a real jobsite advantage if you are moving between prep, primer sanding, and finish sanding on the same day. The Systainer also protects discs from dust, spray, and bent edges that can ruin otherwise good abrasives.
Festool built this set around system use. The Systainer platform connects with other Systainers and previous generations, and it also integrates with many Festool machines and accessories. If your shop or van is already set up around Festool storage, this drops right in instead of becoming one more loose box rolling around the truck.
On the sanding side, this set is suitable for Festool ES 125, ETS 125, ETSC 125, ETSC 2 125, and ETS EC 125 sanders, with supplementary source data also listing compatibility with additional 125 mm Festool models. The discs are 125 mm in diameter and use the hole pattern shown for dust extraction. That is important because clean extraction helps keep abrasive surfaces cutting and reduces extra cleanup on finish work.
This set is a strong fit for painters, cabinet installers, trim carpenters, remodelers, and serious DIY users who want a ready-to-go sanding assortment without overthinking grit selection. It is especially useful if you bounce between coatings, filler work, plastics, and wood and need one organized case instead of a pile of partial boxes.
If you only need one grit for one repetitive task, bulk singles may be the better buy. But if you want a practical range, clean storage, and genuine Festool system organization, this set does exactly what it is supposed to do.
Keep Your Grits Sorted
This setup saves time because every grit has its own place. Instead of flipping through sleeves or half-open boxes, you grab the disc you need and get back to the surface in front of you.
- Five compartments keep P60 through P220 separated and easy to identify
- Refillable layout helps you maintain your most-used grit sizes over time
Fast Changes on the Sander
When you can swap discs quickly, you are more likely to use the right grit instead of forcing one disc to do every step. That usually means better finish quality and less rework.
- 125 mm discs are sized for compatible Festool 5 inch sanders
- Built for sanding painted surfaces, fillers, plastics, acrylic, and hard substrates
Transport Without Wrecking Discs
Loose abrasive discs get bent, dirty, and mixed up fast. The Systainer keeps them protected and travels as part of the Festool system, which is a lot cleaner than carrying individual abrasive boxes to the job.
- SYS3 M 112 Systainer protects discs from dust, water spray, and bending
- Compatible with other Systainers and previous Systainer generations
What’s in the Box
- (20) GRANAT D125 P60 abrasive discs
- (20) GRANAT D125 P80 abrasive discs
- (20) GRANAT D125 P120 abrasive discs
- (20) GRANAT D125 P180 abrasive discs
- (20) GRANAT D125 P220 abrasive discs
- (1) Systainer3 SYS3 M 112
Key Specifications
| Diameter | 5 in (125 mm) |
|---|---|
| Grit Range | P60 / P80 / P120 / P180 / P220 |
| Piece Count | 100 discs |
| Number of Compartments | 5 |
| Abrasive Quality | Granat |
| Systainer Size | SYS3 M 112 |
| Weight | 5 lb |
| Made In | Czech Republic |
Compatibility
Compatible SandersSuitable for Festool ES 125, ETS 125, ETSC 125, ETSC 2 125, and ETS EC 125 sanders. Systainer PlatformSystainer3 format connects with other Systainers and previous Systainer generations, along with many Festool machines and accessories.
Built For
Painting Woodworking Remodeling Finish Sanding Surface Preparation VOC Clear Coats Fillers and Repair Compounds Plastics and Acrylic
Pro Tip
Keep one compartment label tied to one stage of work: rough prep, intermediate smoothing, primer sanding, finish sanding, final touch-up. With a mixed-grit set like this, that simple habit makes it much easier to move through a finish schedule without accidentally jumping too coarse or too fine.
Tool Nut’s Take
Tool Nut’s Take
Festool 578193 Granat D125 Abrasives 100-Piece Value Set Systainer3 is the smart starter pack for a 125 mm Festool sander
If you want real Festool abrasives, a useful grit spread, and storage that does not turn into a mess after the first week, this set is easy to justify.
- Who it’s for: Painters, finish carpenters, cabinet guys, remodelers, and serious DIY users running a compatible Festool 125 mm sander.
- Why it stands out: You are not just buying discs. You are getting a sensible P60 to P220 range, clog-resistant GRANAT abrasives, and a Systainer that actually keeps the whole setup organized.
- Worth knowing: This is a variety pack, not a deep stock of one grit. If your work is heavily skewed toward a single sanding step, you may still want extra refill packs of your most-used grit.
Common Questions
- What type of tool is this for? This is a 125 mm, 5 inch sanding disc assortment for compatible Festool sanders.
- What grit sizes are included? The set includes P60, P80, P120, P180, and P220, with 20 discs of each grit.
- What materials is GRANAT suited for? Festool lists modern paint systems, VOC clear coats, hard substrates, plastics, acrylic, repair compounds, and fillers.
- Does the case work with other Festool storage? Yes. The SYS3 M 112 Systainer is compatible with other Systainers and previous Systainer generations.
Reviews
There are no reviews yet.