Key Features
Five Grits ReadyYou get 20 sheets each of P60, P80, P120, P180, and P220, so you can move from stock removal to finish prep without hunting around for the next grit. Organized Systainer StorageFive dedicated compartments keep the abrasives sorted by grit size, which saves time at the bench and keeps the discs protected during transport. Delta Sander FitThis Festool delta abrasive set is built for the DTS 400, DTSC 400, and DS 400, making it a straightforward stock-up option for detail sanding in corners, edges, and tight spots.
Overview
The Festool 578195 Granat DTS/DTSC 400 Delta Abrasives 100-Piece Value Set Systainer3 is a delta sanding abrasive assortment packed in a SYS3 M 112 Systainer for organized storage and transport. This is a delta sanding disc set designed for detail sanding, finish prep, and surface preparation on paints, hard substrates, fillers, plastics, acrylic, and similar materials. Model Number: 578195. If you already run a Festool delta sander, this set gives you a full working range of grits in one box instead of piecing sheets together one sleeve at a time.
What makes this set useful is the spread of grits. Festool includes 20 Granat STF DELTA/9 abrasives each in P60, P80, P120, P180, and P220. That means you can start with heavier material removal when needed, then step through the sequence for surface prep and final sanding without changing systems or digging through loose packs. For painters, finish carpenters, and woodworkers, that matters because detail sanding usually happens at edges, profiles, corners, and patch areas where changing grits quickly keeps the job moving.
The abrasives themselves are Festool Granat, which is specifically called out for VOC varnishes, hard substrates, and nearly all types of fillers. Festool also notes the special coating is built to resist clogging, which is a big deal when you are sanding modern coatings and compounds that like to load paper fast. Less clogging means the abrasive keeps cutting longer, the scratch pattern stays more consistent, and you are not burning through sheets just because the face loaded up too early.
The case is more than just packaging. The SYS3 M 112 Systainer uses five compartments so each grit has its own place, making it easy to spot what you need at a glance and refill as needed. That sounds simple, but on a real job it keeps worn and fresh sheets from getting mixed together, protects the abrasive from dust, water spray, and bending, and makes the set easier to carry from the shop to the site. Festool also states the Systainer can connect with other Systainers and works with previous Systainer generations, so it fits into the rest of a Festool storage setup instead of becoming one more loose box on the truck.
For sanding performance, the delta format is the whole point. These sheets are made for Festool’s detail sanders, where the pointed pad gets into corners and along narrow profiles that round discs cannot reach cleanly. Acme also notes a MULTI-JETSTREAM 2 layout with 49-hole extraction, which supports low-dust sanding when paired with the right sander and dust collection setup. That helps keep the work surface cleaner and can improve abrasive life by pulling dust away from the face instead of letting it build up under the sheet.
Compatibility is straightforward. This set is suitable for the DTS 400, DTSC 400, and DS 400. If those are the sanders you use for trim work, cabinet work, paint prep, filler repair, or finish sanding in tight areas, this is the practical way to keep the main grit range on hand. It is a smart buy for painters, woodworkers, remodelers, and anyone who wants organized delta abrasives instead of a pile of half-open packs sliding around the van.
Keep Grits Sorted and Easy to Grab
The biggest advantage here is not just the abrasives. It is having the right grit where you expect it every time. The five-compartment layout keeps each grade separate, so you spend less time sorting and more time sanding.
- Five compartments match the five included grit sizes
- Designed to protect abrasives from bending, dust, and water spray
Built for Detail Sanders That Work in Tight Spots
Delta sanders earn their keep in corners, profiles, and edge work where larger pads do not fit well. This set is made to support that kind of sanding with the grits most users actually reach for.
- Suitable for Festool DTS 400, DTSC 400, and DS 400 sanders
- Delta sheet shape is ideal for corners, narrow parts, and detail work
Granat Abrasives Hold Up on Tough Finishes
Granat is a good match for modern coatings and filler-heavy prep work because it is designed to resist loading. That gives you more consistent sanding and fewer wasted sheets when working on painted surfaces, repair compounds, and hard materials.
- Designed for VOC varnishes, hard substrates, and nearly all types of fillers
- Special coating helps reduce clogging and extend service life
What’s in the Box
- (20) Granat STF DELTA/9 P60 GR abrasives
- (20) Granat STF DELTA/9 P80 GR abrasives
- (20) Granat STF DELTA/9 P120 GR abrasives
- (20) Granat STF DELTA/9 P180 GR abrasives
- (20) Granat STF DELTA/9 P220 GR abrasives
- (1) Systainer3 SYS3 M 112
Key Specifications
| Grit Range | P60 / P80 / P120 / P180 / P220 |
|---|---|
| Piece Count | 100 abrasives |
| Systainer Size | SYS3 M 112 |
| Number of Compartments | 5 |
| Abrasive Quality | Granat |
| Dimensions | 396 mm L x 296 mm W x 112 mm H |
| Compatible Sanders | DTS 400, DTSC 400, DS 400 |
| Made In | Czech Republic |
Compatibility
Sander Fit Suitable for Festool DTS 400, DTSC 400, and DS 400 detail sanders. Systainer System Systainer3 storage case connects with other Systainers and is compatible with previous Systainer generations.
Built For
PaintingWoodworkingFinish PrepCorner SandingFiller SandingPlastic and Acrylic Work
Pro Tip
Keep one compartment dedicated to your current working grit and refill from sleeves as needed. On detail sanding jobs, that small bit of organization cuts down on accidental grit jumps that can telegraph scratches into paint prep and finish work.
Tool Nut’s Take
Tool Nut’s Take
Festool 578195 Granat DTS/DTSC 400 Delta Abrasives 100-Piece Value Set Systainer3 Is the Smart Way to Stock a Detail Sander
If you use a Festool delta sander regularly, this set makes a lot of sense because it gives you the grit spread you actually need and keeps it organized in a case that travels well.
- Who it’s for: Painters, woodworkers, remodelers, and finish guys running a DTS 400, DTSC 400, or DS 400 for corners, patch work, profiles, and fine surface prep.
- Why it stands out: You are getting Granat abrasives, five useful grit steps, and a proper Systainer instead of loose sleeves sliding around the shop.
- Worth knowing: This is an abrasive assortment and storage solution, not a sander. It is a great fit if you already own the matching Festool detail sander platform.
Common Questions
- Which sanders does this set fit? It is suitable for Festool DTS 400, DTSC 400, and DS 400 sanders.
- What grit sizes are included? The set includes P60, P80, P120, P180, and P220 Granat abrasives.
- How many sheets come in the set? There are 100 total abrasives, with 20 sheets in each grit.
- What materials is Granat designed for? Festool specifies it for VOC varnishes, hard substrates, and nearly all types of fillers, and also notes it can be used on plastics, acrylic, and similar materials.
Reviews
There are no reviews yet.