Key Features
Four Grits ReadyYou get a usable spread from P80 through P220 in one case, so you can start aggressive material removal and work toward a finer finish without chasing loose discs around the shop or jobsite. Organized PLANEX StorageThe Festool D225 GR SYS Granat Abrasives Systainer keeps 225 mm sanding discs sorted by grit in dedicated compartments, which means less downtime when you need to swap discs fast. Built for Tough FinishesGranat abrasives are made for VOC varnishes, hard substrates, fillers, plastics, acrylic, and other demanding surface prep work where loading and clogging can slow you down.
Overview
The Festool 578281 D225 GR SYS Granat Abrasives Systainer is an abrasive storage and sanding disc kit built around Festool’s 225 mm PLANEX system. This is a sandpaper disc set and storage Systainer designed for drywall sanding, filler sanding, paint prep, and surface finishing with compatible PLANEX long-reach sanders. Model number 578281. If you run a PLANEX and want your most-used grits in one organized case instead of stacked on a shelf or rolling around in the van, this is the clean setup.
What makes this kit useful is not just the discs, but the way Festool packages them. You get 25 Granat discs each in P80, P120, P180, and P220, with the case divided into 8 compartments so every grit has a defined place. On the job, that matters. You can move from heavier stock removal to finish sanding without guessing what is left in the box or wasting time digging through mixed abrasives. For painters, drywall finishers, and remodelers, that kind of organization saves more time than people think.
The abrasive itself is the other half of the story. Festool’s Granat line is specifically called out for VOC varnishes, hard substrates, and nearly all types of fillers, and the coating is designed to resist clogging. In plain terms, that means the discs stay usable longer when you are working dusty fillers, compound, or modern coatings that can load up cheaper paper fast. That longer service life matters most on large wall and ceiling work where changing discs constantly kills momentum.
From a jobsite practicality standpoint, the Systainer does more than hold paper. Festool states it protects the abrasives from dust, water spray, and bending, so the discs are less likely to get damaged in transport or while sitting in a busy shop. The T-LOC style operating element also makes it easy to open, close, and connect the case, which is the kind of thing you appreciate when you are moving multiple boxes in and out of a trailer or room to room during punch work.
Compatibility is straightforward and important here. This set is made for PLANEX LHS 2 225 EQ(I), PLANEX 225 EQ, PLANEX LHS-E 225 easy, and PLANEX LHS 2-M 225 EQ long-reach sanders. The 225 mm disc format is the key fit point, so this is not a general mixed-sander abrasive assortment. It is a PLANEX-focused setup for users who want the right size and a practical grit progression for wall, ceiling, and broad surface sanding.
It is also part of the broader Festool storage ecosystem. The included SYS3 M 337 Systainer can connect with other Systainers, including previous generations and many Festool machines and accessories. That matters if you already organize your gear by process. You can keep your PLANEX abrasives with your sander setup, transport them cleanly, and know exactly where your P80, P120, P180, and P220 stock stands before you leave for the next job.
Who should buy it? Anyone using a compatible Festool long-reach drywall sander on a regular basis. It makes the most sense for drywall contractors, painters, finish crews, and remodelers who burn through 225 mm discs and want a cleaner, more repeatable sanding setup. If you only need a few replacement discs, this is more storage system than you need. If you use a PLANEX weekly and want your abrasives organized, protected, and ready to go, it is a smart buy.
Keep Your Grits Sorted and Ready
If you use a PLANEX regularly, the big benefit here is simple: less time hunting for the right disc and less chance of grabbing the wrong grit halfway through a wall.
- Includes 25 discs each in P80, P120, P180, and P220
- Eight compartments let you separate abrasives by grit for faster changes
Made for PLANEX Surface Prep Work
This kit is not a random assortment. It is built around 225 mm PLANEX sanding, so the disc size and grit selection line up with the kind of broad-surface prep work these sanders are bought for.
- Suitable for PLANEX LHS 2 225 EQ(I), PLANEX 225 EQ, PLANEX LHS-E 225 easy, and PLANEX LHS 2-M 225 EQ
- Granat abrasive is recommended for fillers, plastics, acrylic, hard sublayers, and modern paint systems
Transport Without Wrecking Your Discs
Loose sanding discs get bent, dusty, and mixed up fast. The SYS3 case keeps them protected and makes them easier to move with the rest of your Festool setup.
- Festool states the Systainer protects contents against dust, water spray, and bending
- Compatible with other Systainers and many Festool machines and accessories
What’s in the Box
- (25) Granat STF D225/128 P80 GR abrasives
- (25) Granat STF D225/128 P120 GR abrasives
- (25) Granat STF D225/128 P180 GR abrasives
- (25) Granat STF D225/128 P220 GR abrasives
- (1) Systainerb3 SYS3 M 337
Key Specifications
| Grit Range | P80 / P120 / P180 / P220 |
|---|---|
| Disc Diameter | 225 mm (8.875 in) |
| Number of Compartments | 8 |
| Abrasive Quality | Granat |
| Systainer Size | SYS3 M 337 |
| Weight | 10.9 lbs |
| Overall Size | 396 mm L x 296 mm W x 337 mm H |
| Made In | Czech Republic |
Compatibility
Compatible SandersSuitable for Festool PLANEX LHS 2 225 EQ(I), PLANEX 225 EQ, PLANEX LHS-E 225 easy, and PLANEX LHS 2-M 225 EQ long-reach sanders. Disc FormatUses 225 mm sanding discs sized for the PLANEX platform. Systainer SystemThe SYS3 case is compatible with other Festool Systainers, including previous generations, plus many Festool machines and accessories.
Built For
Drywall Painting Remodeling Surface Preparation Filler Sanding VOC Clear Coats Plastics and Acrylic Hard Substrates
Pro Tip
Set one compartment group for your most-used progression, usually P80 to knock material down, P120 to refine, then P180 or P220 for finish prep. When the discs stay separated by grit in the Systainer, it is a lot easier to keep scratch patterns consistent across a full wall or ceiling.
Warranty & Support
No manufacturer’s warranty is listed for this item.
Tool Nut’s Take
Tool Nut’s Take
Festool 578281 D225 GR SYS Granat Abrasives Systainer Is the Smart Buy for Regular PLANEX Users
This is the kind of setup that makes sense the minute you are tired of bent discs, mixed grits, and wasted time at the sanding station.
- Who it’s for: PLANEX users doing drywall finishing, paint prep, filler sanding, and remodel work where 225 mm discs get used often.
- Why it stands out: You are getting a practical four-grit spread, Granat abrasive performance, and a real storage system that keeps everything protected and easy to grab.
- Worth knowing: This is a focused abrasive kit for compatible Festool long-reach sanders, not a universal assortment. If you do not run a 225 mm PLANEX, this is not your lane.
Common Questions
- Which sanders does this fit? It is listed as suitable for Festool PLANEX LHS 2 225 EQ(I), PLANEX 225 EQ, PLANEX LHS-E 225 easy, and PLANEX LHS 2-M 225 EQ long-reach sanders.
- What grit sizes are included? The set includes P80, P120, P180, and P220 Granat sanding discs.
- What materials is the Granat abrasive meant for? Festool calls it out for VOC varnishes, hard substrates, fillers, plastics, mineral materials, acrylic, repair compounds, and modern paint systems.
- Does the case connect with other Festool Systainers? Yes. Festool states the Systainer is compatible with other Systainers, including previous generations, and can connect with many machines and accessories.
Reviews
There are no reviews yet.