Key Features
Aggressive P24 CutThis coarse abrasive is built for fast material removal when lighter paper just skates over the surface. It is a good fit for knocking down texture, stripping stubborn coatings, and leveling hard surfaces before moving to a finer grit. 48-Hole Dust FlowThe 48-hole pattern works with Festool Jetstream-style dust extraction to pull debris off the pad instead of letting it pack into the abrasive. That helps the sheet cut more consistently and last longer in heavy sanding. Made for PLANEXFestool 205650 Saphir Abrasive Sheets are sized for 9 inch PLANEX long-reach sanders, so you get the right diameter, hole layout, and backing for drywall and surface-prep work overhead or across large wall areas.
Overview
Festool 205650 Saphir Abrasive Sheets are 9 inch, P24 grit sanding discs sold in a 25-pack for Festool PLANEX drywall sanders. This is a drywall sander abrasive designed for aggressive stock removal, texture removal, and sanding hard, stubborn surfaces. Model Number: 205650. If your job starts with thick buildup, rough compound, plaster, or coatings that need to come off fast, this is the coarse paper you reach for before refinement starts.
The big story here is cut speed. P24 is an intentionally rough grit, and Festool positions the Saphir line for the toughest, most challenging surfaces. In practical terms, that means this abrasive is meant for the ugly part of the job: removing texture, flattening heavy buildup, and getting through hard coatings or surface contamination that would quickly clog or dull lighter-duty paper. It is well suited for quick removal of textures and for sanding hard surfaces when production matters more than finish quality at this stage.
The Festool 205650 Saphir Abrasive Sheets use a 225 mm diameter format, which is the standard 9 inch size used on PLANEX long-reach sanders. That large disc size matters on walls and ceilings because it covers more area per pass and helps keep the sanding pattern consistent over broad surfaces. For drywall contractors, remodelers, and painters doing prep, that means less time chasing uneven removal across large fields.
Material construction matters with coarse abrasives, and the product data points to a heavy-duty build. Supplementary source data identifies a durable aluminum oxide abrasive with ceramic alumina and a tear-resistant cloth or fabric backing for longer life in extreme applications. That is exactly what you want in a coarse disc. Lower-grade paper can tear, load up, or lose bite too early when you lean on it. A tougher backing helps the disc stay intact when the work is rough and the pressure is real.
Dust handling is another reason this disc makes sense in the Festool system. The disc uses a 48-hole pattern and Festool calls out Jetstream dust removal benefits. On the job, good dust extraction is not just about cleaner air. It helps keep the abrasive face from packing up, which maintains cutting action and reduces the heat and drag that can shorten disc life. When you are sanding drywall compound, plaster, paint, fiberglass, composites, concrete, or steel, that cleaner airflow helps the disc keep working instead of glazing over early.
Compatibility is clear and important here. These abrasive sheets are suitable for the Festool PLANEX LHS 2 225 EQ(I), PLANEX 225 EQ, PLANEX LHS-E 225 easy, and PLANEX LHS 2-M 225 EQ long-reach sanders. This is not a generic one-size-fits-all sanding sheet. The diameter and hole pattern are built around the PLANEX platform, so buyers should match the tool and pad correctly if they want full dust extraction performance.
Use case matters with a disc like this because P24 is not a finishing grit. It is for removal, leveling, and prep work where speed comes first. If you are opening up a surface before patching, stripping down problem coatings, or knocking down heavy texture before stepping through finer grits, this is the right type of abrasive. If you are already at the smoothing stage, this grit is too aggressive and you should move finer.
Who should buy it? Contractors using PLANEX sanders for drywall, renovation, repaint prep, and surface restoration will get the most value here. It also makes sense for pros dealing with hard coatings and stubborn materials on wood, paint, plastics, fiberglass, composites, concrete, and steel. Serious DIY users can absolutely use it, but this is a purpose-built coarse abrasive for people who know the first pass is about fast removal, not finish-ready results.
Fast Removal on Tough Surfaces
When the surface is thick, uneven, or packed with old texture, a coarse disc saves real time. The Festool 205650 Saphir Abrasive Sheets are built for that first aggressive pass where the goal is to remove material quickly and get the wall or ceiling under control.
- P24 grit for heavy stock removal and rapid texture knockdown
- Designed for hard, stubborn surfaces and heavy-duty sanding conditions
Dust Extraction That Helps the Disc Last
Coarse paper works best when dust can actually clear the face of the disc. The 48-hole layout supports efficient extraction, which means less loading, steadier cutting, and fewer wasted sheets during long wall and ceiling runs.
- 225 mm disc with 48-hole pattern
- Jetstream design supports cleaner air, better finishes, and longer abrasive and pad life
Built for the PLANEX Platform
Fit matters with large-format sanding discs. This sheet is sized specifically for Festool PLANEX long-reach sanders, so the diameter and hole pattern match the machine the way they should. That gives you better pad contact and full use of the extraction system instead of a near fit that works poorly.
- Compatible with select Festool PLANEX 225 mm long-reach sanders
- Sold as a 25-pack for production sanding and repeat jobs
What’s in the Box
- (25) Festool Saphir P24 abrasive sheets, 9 in / 225 mm
Key Specifications
| Grit | P24 |
|---|---|
| Diameter | 9 in (225 mm) |
| Hole Pattern | 48 holes |
| Abrasive Line | Saphir |
| Mineral | Aluminum Oxide & Ceramic Alumina |
| Backing Material | Cloth |
| Package Quantity | 25 |
| Made In | Germany |
Compatibility
Tool PlatformFits Festool PLANEX long-reach drywall sanders using 225 mm sanding discs. Compatible ModelsSuitable for PLANEX LHS 2 225 EQ(I), PLANEX 225 EQ, PLANEX LHS-E 225 easy, and PLANEX LHS 2-M 225 EQ. Dust Extraction48-hole layout supports Festool Jetstream dust removal when paired with the correct pad and extractor setup.
Built For
Drywall Painting Prep Remodeling General Contracting Texture Removal Hard Surface Sanding Plaster and Compound Prep Surface Restoration
Pro Tip
Use this P24 disc for the first cut only, especially on texture or thick coatings. Once the surface is flat, step down to a finer PLANEX abrasive instead of trying to finish with this grit, or you will spend extra time chasing out deep scratch marks.
Warranty & Support
No manufacturer’s warranty is listed for this abrasive pack.
Tool Nut’s Take
Tool Nut’s Take
Festool 205650 Saphir Abrasive Sheets are the right call when removal speed matters more than finesse
This is the kind of abrasive you buy for ugly prep work, and that is exactly why it earns its keep.
- Who it’s for: PLANEX users stripping texture, flattening rough compound, or grinding through hard coatings on walls and ceilings.
- Why it stands out: Coarse P24 bite, heavy-duty abrasive build, and a 48-hole pattern that works with Festool dust extraction instead of fighting it.
- Worth knowing: This is not a finish sanding disc. It is a first-step paper for fast removal, so plan on following it with finer grits if you need a paint-ready surface.
Common Questions
- What tool is this abrasive made for? It is made for Festool PLANEX 225 mm long-reach drywall sanders, including the PLANEX LHS 2 225 EQ(I), PLANEX 225 EQ, PLANEX LHS-E 225 easy, and PLANEX LHS 2-M 225 EQ.
- What grit is it? This pack is P24 grit, which is a very coarse abrasive intended for aggressive removal rather than finish sanding.
- What materials can it be used on? Product data lists it for heavy-duty sanding on wood, paint, plastics, fiberglass, composites, concrete, steel, drywall compound, and plaster.
- Does it support dust extraction? Yes. The 48-hole disc layout is designed to work with Festool’s dust removal system for better debris extraction and more consistent sanding.
Reviews
There are no reviews yet.