Key Features
7 x 12 CapacityThe JET HVBS-712 7 In. x 12 In. Horizontal/Vertical Bandsaw gives you true metal-cutting capacity for stock that quickly outgrows small benchtop saws. That means fewer workarounds when you’re cutting round, square, and rectangular material in a fabrication or maintenance shop. Four Blade SpeedsWith blade speeds of 86, 132, 178, and 260 surface feet per minute, you can match the cut to the material instead of forcing one speed to do everything. That helps blade life, cut control, and finish quality on a range of metal stock. Built Like a Shop ToolFlanged cast iron blade wheels, adjustable ball bearing blade guides, and a sealed hardened ground gear drive system are the kind of details that matter after months of use, not just on day one. You get a more stable cut and a machine that is built for regular shop work.
Overview
The JET HVBS-712 7 In. x 12 In. Horizontal/Vertical Bandsaw is a stationary metal-cutting bandsaw built for shops that need one machine to handle both straight horizontal cutoff work and upright vertical cutting. This is a horizontal/vertical metalworking bandsaw designed for cutting steel, tubing, bar stock, and other shop material accurately and repeatedly. Model Number: HVBS-712. If you need more capacity and control than a small portable saw can offer, this is the step up that starts to make real sense.
On capacity alone, this saw covers a lot of common fabrication work. It handles round stock up to 7 inches at 90 degrees, square stock up to 7 inches by 7 inches, and rectangular cuts up to 4 inches by 10-3/8 inches at 90 degrees, with a listed cutting capacity of 7 inches by 12 inches. The rapid-action vise swivels to 45 degrees, so angle cuts do not turn into a clamp-and-guess routine. Add the adjustable material stop and you have a setup that is better suited for repeat parts, short-run production, and general shop efficiency.
The drive and guide system are where this saw starts separating itself from lighter-duty machines. JET uses a belt-to-sealed, hardened, and ground gear drive system, along with adjustable ball bearing blade guides and flanged cast iron blade wheels. In plain terms, that means the blade is better supported, the tracking components are more durable, and the whole setup is built for steadier cutting over time. The included 3/4 inch bi-metal blade, 93 inch blade length, and four blade speeds of 86, 132, 178, and 260 surface feet per minute give the operator useful flexibility for different metal types and wall thicknesses.
Jobsite practicality is not really the point here. Shop practicality is. The cast-mounted adjustable hydraulic downfeed helps you control feed rate without babying the saw through every cut, and the auto shut-off after cut is one of those features you appreciate more the longer the day gets. JET also includes a complete coolant system with a 1 gallon coolant capacity, which matters when you are trying to manage heat and blade life on heavier or repeated cuts. The improved stand includes a built-in storage cabinet and chip tray, and four 8 inch rubber wheels make it easier to move the machine around the shop when needed.
Power comes from a 3/4 horsepower, single-phase motor rated for 115/230V operation, and the machine is prewired for 115V. That gives smaller shops some flexibility if they are starting on standard power and may later reconfigure the space for 230V service. The step pulley drive is straightforward and proven, which is exactly what many buyers want in a machine like this. Less complexity, predictable maintenance, and a setup that does what it is supposed to do.
Who is this saw for? Metalworking shops, maintenance departments, farm shops, vocational programs, and serious fabricators who need a dependable cutoff saw with vertical capability. If most of your work is occasional light trimming, it is probably more machine than you need. If you regularly cut tubing, angle, bar, and plate-backed stock and want a saw that is built to live in the shop, the JET HVBS-712 7 In. x 12 In. Horizontal/Vertical Bandsaw is in the right lane.
At a Glance
7 in. x 12 in.Cutting Capacity3/4 HPMotor4Blade Speeds45°Vise Swivel
Horizontal Cutting With Real Shop Control
This setup is about repeatable cutoff work without constant babysitting. The hydraulic downfeed, auto shut-off, and adjustable stop help you keep cuts consistent while freeing you up to do the next task in the shop.
- Cast-mounted adjustable hydraulic downfeed for controlled feed rate
- Auto shut-off after cut for better unattended cutoff workflow
- Adjustable material stop helps with repeated length cuts
Switch to Vertical Work When the Job Calls for It
The vertical mode gives this metal cutting bandsaw extra versatility without taking up space with a second machine. It is a practical setup for small parts, trim work, and jobs where you need to guide the material by hand at the table.
- Work table in vertical position is listed as 9-7/16 in. x 10 in. or 9 in. x 12 in. depending on source data
- 7 in. throat depth supports upright cutting tasks
- Stationary design is better suited for shop-based metalworking than jobsite use
Built for Durability, Not Disposable Use
This machine is loaded with the kind of construction details that matter if the saw is going to earn its keep. The gear drive, cast iron blade wheels, and ball bearing guides are there to improve stability and wear life over the long haul.
- Blade drive uses a belt to sealed, hardened, and ground gear drive system
- Blade wheels are flanged cast iron for increased durability
- Adjustable ball bearing blade guides support straighter cutting
What’s in the Box
- JET HVBS-712 7 In. x 12 In. Horizontal/Vertical Bandsaw
- (1) 3/4 in. bi-metal blade
- Owner’s manual
Key Specifications
| Tool Type | Horizontal / Vertical Metalworking Bandsaw |
|---|---|
| Motor | 3/4 HP, 1 Phase |
| Voltage (V) | 115/230V, prewired 115V |
| Blade Speeds | 86, 132, 178, 260 SFPM |
| Blade Size | 3/4 in. x 0.032 in. x 93 in. |
| Cutting Capacity | 7 in. x 12 in. |
| Round Capacity at 90° | 7 in. |
| Square Capacity at 90° | 7 in. x 7 in. |
| Rectangle Capacity at 90° | 4 in. x 10-3/8 in. |
| Vise Swivel | 45° |
| Coolant Capacity | 1 gal. |
| Drive Type | Step Pulley |
| Overall Dimensions | 48 in. x 17 in. x 40 in. |
| Weight (lbs) | 374 lbs net; 418 lbs gross |
| Made In | Taiwan |
Built For
MetalworkingFabrication ShopsMaintenance DepartmentsMachine ShopsGeneral Contracting ShopsFarm and Ranch RepairCutting Tube and Bar StockRepeatable Cutoff Work
Pro Tip
If you’re cutting multiple pieces to the same length, take the time to dial in the adjustable material stop and the hydraulic downfeed together. Once those two are set right, the HVBS-712 becomes a much better production helper and a lot less of a one-cut-at-a-time machine.
Warranty & Support
2-year limited factory warranty.
Tool Nut’s Take
Tool Nut’s Take
JET HVBS-712 7 In. x 12 In. Horizontal/Vertical Bandsaw for shops ready to stop fighting light-duty saws
This is the kind of bandsaw that makes sense when cutoff work is a regular part of the week and you want one machine that can also handle vertical metal cutting without taking over the whole shop.
- Who it’s for: Fabricators, maintenance techs, farm shops, and serious metalworking users who need more capacity, more control, and more durability than a small portable saw can deliver.
- Why it stands out: The hydraulic downfeed, auto shut-off, coolant system, 45 degree swiveling vise, and cast iron wheel setup give it real shop value, not just brochure value.
- Worth knowing: This is a heavy stationary machine. That’s a plus for stability, but make sure you’re buying it for shop use and not expecting a portable solution.
Common Questions
- Can this saw be used in both horizontal and vertical positions? Yes. The HVBS-712 is designed as a horizontal/vertical bandsaw and includes a work table for vertical cutting.
- What power does it require? It uses a 3/4 horsepower, single-phase motor rated for 115/230V operation, and it is prewired for 115V from the factory.
- Does the vise cut angles? Yes. The rapid-action vise swivels to 45 degrees for miter cuts.
- Does it include coolant capability? Yes. It has a complete coolant system with a 1 gallon coolant capacity.
Reviews
There are no reviews yet.