Key Features
Built for MetalThis Lenox 3842738PW1418 WOLF-BAND Portable Band Saw Blade is made for metal cutting, so you get a blade matched to the job instead of a general-purpose band saw blade that gives up early. 14/18 TPI TeethThe 14/18 teeth-per-inch pitch is aimed at controlled cutting in metal, giving you a tooth pattern that helps balance cut quality and blade life on portable band saw work. Bi-Metal DurabilityBi-metal construction is designed to bend and resist breaking, which matters when a portable band saw blade sees real jobsite use instead of perfect shop conditions.
Overview
The Lenox 3842738PW1418 WOLF-BAND Portable Band Saw Blade, 44-7/8 x 1/2 x .020 14/18 TPI, 25-Pack is a portable band saw blade pack built for metal cutting. This is a band saw blade designed for portable metal cutting. If you run a portable band saw on conduit, strut, tubing, or similar stock, this blade size and tooth pattern are aimed at that kind of work. Model Number: 3842738PW1418.
What matters here is not just the size on the label. The 44-7/8 inch length, 1/2 inch width, and 0.020 inch thickness tell you this blade is meant for a specific class of portable band saws, and those dimensions directly affect fit, tracking, and cut behavior. The 14/18 teeth-per-inch configuration is a practical choice for metal cutting where you want a blade that can stay controlled through different wall thicknesses without being overly aggressive.
Lenox uses a bi-metal build here, and that matters on a portable saw more than it does on paper. Portable band saw blades get twisted, bumped, and pushed through awkward cuts on installed material. A bi-metal blade that bends and resists breaking gives you a better shot at keeping the blade in service instead of swapping it out early after one bad bind or a rough setup.
The product information also calls out high speed steel teeth for a strong, long lasting cutting edge, plus Lenox TUFF TOOTH design details intended to reinforce the tooth for longer life. In plain terms, this is the part of the blade that has to keep doing the work. If the teeth wear fast, the blade stops earning its keep. This design is aimed at lowering cost per cut by helping the cutting edge stay useful longer.
Lenox also highlights enhanced beam strength on these portable band saw blades. That is worth paying attention to because deflection and twisting are exactly what can ruin a cut on a small, handheld saw. When the blade stays more stable, you are more likely to get straighter results in metal and spend less time fighting wander.
Because this is a 25-pack, it makes sense for crews and shops that do regular metal cutting instead of occasional one-off work. If your portable band saw is part of your daily workflow, buying blades one at a time gets old fast. A pack like this keeps replacements on hand and helps standardize what everybody on the crew is loading into the saw.
This Lenox portable band saw blade pack is a strong fit for electricians, plumbers, HVAC installers, metalworking shops, and general contractors who use portable band saws for clean, controlled metal cutting. If your saw takes this blade size, this is the kind of consumable that makes sense when uptime matters and bargain blades end up costing more in the long run.
Cut Metal with Better Control
This is where a portable band saw blade has to prove itself. The Lenox 3842738PW1418 is built for metal cutting and uses a tooth pattern meant for controlled results on the kind of stock portable saws see every day.
- Designed for cutting metal
- 14/18 teeth per inch for portable band saw work
Made to Last Longer on the Saw
Portable saw blades take abuse. Bi-metal construction, reinforced tooth design, and added beam strength are all aimed at keeping the blade usable longer when cuts are less than perfect and the work is not always easy to fixture.
- Bi-metal blade resists breaking
- High speed steel teeth provide a long lasting cutting edge
What’s in the Box
- (25) Lenox portable band saw blades
Key Specifications
| Blade Length | 44.875 in |
|---|---|
| Blade Width | 0.5 in |
| Blade Thickness | 0.02 in |
| Teeth Per Inch | 14/18 TPI |
| Blade Material | Bi-metal |
| Material Cut | Metal |
| Pack Quantity | 25 |
| Weight | 3.55 lbs |
| Made In | United States |
Compatibility
Portable Band Saw Fit Designed for portable band saw applications that use a 44-7/8 in long, 1/2 in wide, 0.020 in thick blade.
Built For
Metal CuttingElectricalPlumbingHVACMetalworkingGeneral Contracting
Warranty & Support
Lifetime warranty against manufacturer’s defects.
Tool Nut’s Take
Tool Nut’s Take
Lenox 3842738PW1418 WOLF-BAND Portable Band Saw Blade for crews that actually burn through blades
This is the kind of 25-pack that makes sense when your portable band saw is a daily-use metal cutting tool, not something that comes out twice a year.
- Who it’s for: Pros running portable band saws for metal cutting in electrical, plumbing, HVAC, and general construction work.
- Why it stands out: Bi-metal construction, high speed steel teeth, and reinforced tooth design all point to better durability and better cost per cut than throwaway blades.
- Worth knowing: Blade size matters. Make sure your saw takes a 44-7/8 in x 1/2 in x 0.020 in blade before you load up on a 25-pack.
Common Questions
- What is this blade designed to cut? It is specified for cutting metal.
- What tooth pitch does it use? This blade uses a 14/18 TPI tooth pattern.
- What type of blade material is it? It is a bi-metal band saw blade with high speed steel teeth.
- Where is it made? It is made in the United States.
Reviews
There are no reviews yet.