118 inch straight-line capacityRun clean rips down full sheet goods without dragging out a table saw. Great for breaking down plywood and MDF on site.Dead-on guidanceThe rail is designed to interface with the saw base so the cut tracks straight, including bevel cuts when you need an edge that is ready to assemble.Makita track saw compatibleBuilt for Makita plunge track saws, with optional adapters available for select routers and circular saws. Also compatible with Festool and other brands.
Makita 194367-7 118″ Guide Rail for Track Saws Overview
The Makita 194367-7 118″ Guide Rail for Track Saws is a long guide rail made to turn a Makita plunge track saw into a straight-cutting system for sheet goods. This is a guide rail designed for ripping and straight, accurate cutting with compatible track saws.
In real use, the value is simple: you lay the rail, set your saw on it, and you get a straight cut without building jigs or fighting a wobbling edge guide. For cabinet parts, countertops, doors, and jobsite breakdown of plywood, a long rail like this keeps you moving and keeps your cuts consistent.
Makita designs this rail to interact with the saw base so the saw tracks smoothly and stays where you put it. That matters when you are making finish-critical cuts, and it also matters when you are cutting bevels, because the rail gives the saw a stable path instead of letting the base wander.
If you are trying to replace some table saw tasks on site, a plunge track saw plus rail is one of the most portable ways to get straight rips in sheet material. The rail does the alignment work so you can focus on layout and fit-up.
Compatibility is the other big reason to buy this specific rail. It is intended for Makita plunge track saws including XPS01, XPS02, and SP6000 series models. It can also be used with select routers and circular saws when you add the correct Makita adapters.
This is a good buy for woodworkers, remodelers, and finish crews who want repeatable straight cuts on large panels, or anyone already running a Makita track saw system and wants a full-length rail for longer rips.
- Tool Type: Guide rail
- Primary Use: Straight and bevel-guided cutting of sheet material with a compatible track saw
- Power Source: Non-powered accessory
Break down sheet goods with control
When you are ripping plywood or MDF, the rail gives your track saw a fixed path so your cut stays straight from start to finish. That means cleaner edges and less time correcting a bad line.
- Designed for ripping sheet material
- Guide rail length: 118 inch
- Works with Makita, Festool and other brands of plunge track saws (saw sold separately)
Straight cuts and bevel cuts that stay on track
The rail is engineered to interface with the saw base, helping the saw travel smoothly and predictably. That stability is what lets you trust the rail for straight rips and bevel work.
- Engineered for smooth, straight guidance
- Supports straight cutting and bevel cutting with compatible saws
- Accessory type: Guide rail
Build it into your Makita cutting setup
If you already own a Makita plunge track saw, this rail is the foundation for repeatable panel cuts. You can also expand the system to other tools with the right adapters.
- For use with Makita plunge saw models XPS01, XPS02, and SP6000 series
- Can be used with select routers and circular saws with adapter 194579-2 and 196953-0
- Ideal for jobsite and shop layout work on large panels
What’s in the Box
(1) 118 inch Guide Rail
Key Specifications
Model Number
194367-7Rail Length
118 inchWeight
36.0 lbsMaterial
MetalCountry of Origin
ChinaUPC
088381335201
Compatibility
Makita plunge track sawsFor use with Makita plunge saw models XPS01, XPS02, and SP6000 (including SP6000K and SP6000J variants).Adapters for other toolsAlternate use with select routers and circular saws when used with Makita router guide rail adapter 194579-2 and saw guide rail adapter 196953-0.
Built For
WoodworkingCabinetryTrim and MillworkRemodelingSheet Goods BreakdownStraight Rip Cutting
Warranty & Support
Warranty type listed as a 1 Year Limited warranty.Tool Nut’s Take
The long rail for full-sheet work
The Makita 194367-7 118″ Guide Rail for Track Saws is the add-on that makes your Makita track saw feel like a panel saw when you are breaking down big material.
- Who it’s for: Anyone doing cabinetry, built-ins, or remodeling who needs straight rips on plywood and MDF without hauling a table saw.
- Why it stands out: 118 inches of guided cut length for full-sheet work, with the rail engineered to track smoothly with the saw base.
- Worth knowing: This is the rail only. The saw is not included, and using it with other tool types may require Makita adapters.
Common Questions
- Which Makita track saws work with this rail? It is listed for Makita plunge saw models XPS01, XPS02, and SP6000 (including SP6000K and SP6000J variants).
- Can I use this rail with a router or another saw? Yes, it is listed for alternate use with select routers and circular saws when used with Makita adapter 194579-2 (router) and 196953-0 (saw).
- What comes in the box? (1) 118 inch guide rail.
Reviews
There are no reviews yet.