Key Features
Big Capacity CutsCuts up to 8 inch crown nested, 6-3/4 inch baseboard vertically, and 15 inch crosscuts at 90 degrees. That gives this saw real trim and finish range without stepping up to a shop-only machine. Compact Accurate SlideThe 2-steel rail sliding system and linear ball bearing design help the Makita sliding compound miter saw run smooth and stay precise, while the reduced footprint lets it work flush against a wall. Direct Drive AdvantageThe 15 amp direct drive motor delivers 3,200 RPM with no belts to slip or replace. You get smoother starts, steady power under load, and less maintenance over time.
Overview
The Makita LS1219L 12″ Dual-Bevel Sliding Compound Miter Saw with Laser is built for trim work, framing crosscuts, and finish carpentry where capacity and accuracy both matter. This is a sliding compound miter saw designed for crosscutting, mitering, and bevel cutting in wood trim, dimensional lumber, baseboard, and crown molding. Model Number: LS1219L. If you need a 12 inch miter saw that can handle tall stock and wide boards without taking over the whole shop or trailer, this one is aimed right at that job.
Where this saw separates itself is the combination of cut capacity and layout-friendly design. It will cut up to 15 inches at 90 degrees, handle up to 8 inch crown molding vertically nested, and cut up to 6-3/4 inch baseboard vertically. That matters on real jobs because it lets you cut larger finish material upright when that is the cleanest and fastest way to work, instead of wrestling pieces flat or reaching for another saw.
Makita uses a direct drive system here instead of a belt drive. In plain terms, that means fewer wear parts, more direct power transfer from motor to blade, and more consistent cutting feel under load. The 15 amp motor turns the blade at 3,200 RPM, and the saw also uses soft start and electronic speed control. Soft start keeps startup more controlled, and constant speed control helps the blade stay more consistent when you are pushing through denser trim or wider stock.
The slide system is a big deal on the LS1219L. Makita’s rail design reduces the rear footprint so the saw can operate flush against a wall, which is a real advantage in tight shops, garages, and jobsite setups. You do not need to leave the same rear clearance that many sliding miter saws demand. Combined with the front bevel lock, it makes setup and adjustments easier when the saw is parked on a bench, stand, or against a wall in a trailer.
Accuracy details are not just brochure talk on this model. The linear ball bearing system is designed to reduce deflection for smoother travel and more repeatable cuts. The tall integrated fence system adds support for miter and bevel work, and the replaceable stainless steel miter scale uses large markings that are easier to read when you are moving fast. There is also a built-in laser with micro-adjustment for left-of-blade or right-of-blade reference, so you can dial the line of cut to the way you actually work.
Jobsite practicality is also well thought out. Dual dust collection ports improve dust extraction with the included bag or with a vacuum connected separately. The electric brake helps speed up repetitive cut cycles, and the see-through blade guard improves visibility as you line up the cut. Makita also kept the saw at 65 pounds, which is still substantial, but lighter and more portable than a lot of 12 inch sliding saws in this class.
The miter range runs 0 to 60 degrees left and right, with positive stops at 0, 15, 22.5, 31.6, 45, and 60 degrees. The bevel range runs 0 to 48 degrees left and right. That gives the saw the flexibility needed for common trim angles, casing work, crown installs, and general remodeling cuts without awkward repositioning.
This Makita miter saw makes the most sense for finish carpenters, remodelers, deck builders, punch-list crews, and serious DIY users who want pro-level cut quality and capacity. If you mostly cut small trim once in a while, it is more saw than you need. If you regularly cut crown, tall base, shelving parts, or wide boards and you want a sliding miter saw that stays accurate and does not waste bench space, this is one of the smarter setups in the category.
Designed to Work Tight to the Wall
A lot of sliding miter saws need extra room behind them. The LS1219L is built to reduce that problem, which makes a difference in cramped shops, garages, and trailer setups.
- 2-steel rail sliding system helps reduce the saw footprint during operation
- Front bevel lock keeps adjustments accessible without reaching around the back
- 65 lb weight is manageable for a 12 inch sliding miter saw in this class
Cut Capacity That Earns Its Space
This is the kind of saw you buy when trim work gets bigger and your old setup starts coming up short. Wide crosscuts and tall vertical cuts are where this model pays off.
- Up to 15 inch crosscuts at 90 degrees
- Up to 8 inch crown molding nested and 6-3/4 inch baseboard vertically
- 0 to 60 degree miter left and right, plus 0 to 48 degree bevel left and right
What’s in the Box
- Makita LS1219L 12 inch Dual-Bevel Sliding Compound Miter Saw with Laser
- 60 tooth carbide-tipped blade
- Dust bag
- Vertical vise / vertical clamp
- Wrenches
- Triangle
Key Specifications
| Blade Diameter | 12 in |
|---|---|
| Arbor Size | 1 in |
| Motor | 15 Amp, 120V direct drive |
| No-Load Speed | 3,200 RPM |
| Max Cutting Capacity at 90° | 3-5/8 in x 15 in |
| Max Cutting Capacity at 45° Miter | 3-5/8 in x 10-1/2 in |
| Miter Range | 0° to 60° left and right |
| Bevel Range | 0° to 48° left and right |
| Weight | 65 lbs |
| Dimensions | 35-1/4 in x 26-1/8 in x 28-1/2 in |
Built For
Finish CarpentryRemodelingTrim InstallationBaseboard and CasingCrown MoldingGeneral ContractingWoodworkingSerious DIY
Pro Tip
If you are setting this saw up on a bench against the wall, leave yourself room for stock support, not rail travel. The LS1219L’s compact slide design and front bevel lock are what make that layout work better than most 12 inch sliding saws.
Warranty & Support
1 Year Limited Warranty.
Tool Nut’s Take
Tool Nut’s Take
Makita LS1219L 12″ Dual-Bevel Sliding Compound Miter Saw with Laser is built for guys who want capacity without a huge footprint
This is one of the more practical 12 inch sliding miter saw setups out there if you need wide cuts, tall trim capacity, and a saw that does not force you to waste bench space behind it.
- Who it’s for: Finish carpenters, remodelers, and serious woodworkers cutting crown, base, casing, shelving, and wide stock on a regular basis.
- Why it stands out: The direct drive motor, wall-hugging slide design, front bevel lock, laser, and strong vertical cut capacity make it more jobsite-friendly than a lot of full-size sliding saws.
- Worth knowing: At 65 pounds, it is portable for its class, but it is still a full-size 12 inch saw. If you only do light trim once in a while, this is more machine than you need.
Common Questions
- What is the maximum crosscut at 90 degrees? The LS1219L can make crosscuts up to 15 inches at 90 degrees.
- Does this saw bevel both left and right? Yes. It bevels 0 to 48 degrees left and right.
- Does it have a laser guide? Yes. It has a built-in laser line with micro-adjustment for left-of-blade or right-of-blade reference.
- Can it be used close to a wall? Yes. Its rail system is designed for a reduced footprint so the saw can operate flush against a wall.
Reviews
There are no reviews yet.