The filter removes water, dirt and other harmful particles larger than 0.01 microns. The filter removes water, dirt and other harmful particles for your air system. This model has G 1 inch ports. The maximum flow rate is 4200 l/min. Please note that the maximum flow rate alone doesn’t provide enough information to proper sizing. Use the flow curve to determine if the pressure drop (droop) within your expected flow rate range is acceptable. The flow curve shows the flow rate for a set input pressure with multiple output pressures. For each output pressure, it can be seen how the pressure changes with increasing flow rate. It is recommended to use the device in the flat range of the curve, and not on the beginning or the end of the curve.
The maximum input pressure is 20.0 bar (290 psi) and the temperature range is between -10 and 60 °C (14 and 140 °F). It has an auto condensate drain. The housing material is made out of zinc die-cast and the filter has a bowl made of metal. The use of microfilters is required where a high level of compressed air purity is required. The finest particles (> 0.01 microns) and oil mist are separated here. A prefilter should be connected upstream to increase the service life. In order to extend the life of activated carbon filters, microfilters and prefilters are used.
Mounting brackets need to be ordered separately.
Specifications
Connection size : 1 inch
Max flow rate (l/min) : 4200
Max. pressure difference at 20 °C (bar) : 20
Filter size (µm) : 0.01
FRL feature : Microfilter
Material : Zinc die-cast
Condensate drain type : Auto
Min pressure (bar) : 1.5
Connection type : Inner thread cylindrical BSPP-G
Model : Multifix 5
Filter container capacity (cm³) : 130
Min temperature (°C) : -10
Max temperature (°C) : 60
Height (mm) : 402
Length (mm) : 100
Container material : Metal
Reviews
There are no reviews yet.