Milwaukee 3697-22 M18 FUEL Gen4 1/2-in. Hammer Drill and 1/4-in. Hex Impact Driver Combo Kit with PACKOUT Tool Case with Customizable Insert

Key Features

Gen 4 Power PairThis Milwaukee 3697-22 M18 FUEL Gen4 1/2-in. Hammer Drill and 1/4-in. Hex Impact Driver Combo Kit gives you a heavy-duty drilling tool and a fast driving impact driver in one setup, so you can move from drilling to fastening without switching tools. Compact Working SizeThe hammer drill is only 6.9 inches long and the impact driver is only 4.47 inches long, which matters when you are working inside cabinets, between studs, or overhead where bulk slows you down. Storage That TravelsThe included PACKOUT tool case adds real jobsite value, not just packaging. The customizable foam insert helps protect the drill, impact driver, batteries, and charger while keeping the kit organized in transit.

Overview

The Milwaukee 3697-22 M18 FUEL Gen4 1/2-in. Hammer Drill and 1/4-in. Hex Impact Driver Combo Kit with PACKOUT Tool Case with Customizable Insert is a cordless two-tool combo kit built for drilling, hammer drilling, and fastener driving on the jobsite. This is a combo kit designed for general drilling, masonry drilling, and high-speed fastening. Model Number 3697-22-48-22-8450 combines Milwaukee’s Gen 4 M18 FUEL hammer drill and impact driver with two 5.0Ah batteries, a multi-voltage charger, a side handle, a hard case, and a PACKOUT tool case with customizable insert.

The big reason this kit matters is that it covers the work most contractors do every day with two tools that are meant to stay in rotation. The 1/2 inch hammer drill is built for drilling wood, metal, and masonry, and Milwaukee calls out the ability to complete 2-9/16 inch self-feed holes in dense material. That tells you this is not a light-duty homeowner drill. The included hammer mode also makes it useful for drilling into brick, block, or concrete when you need anchors or Tapcons. On the fastening side, the 1/4 inch hex impact driver delivers up to 2,000 inch-pounds of torque and up to 3,900 RPM, giving you the speed and power needed for structural screws, ledger fasteners, cabinet installation, electrical rough-in, and general assembly work.

Milwaukee also got the size right. The hammer drill is only 6.9 inches long, and the impact driver is only 4.47 inches long. That shorter head length makes a real difference when you are drilling between joists, driving screws inside a sink base, or working around ductwork and pipe runs. Compact tools cut down on awkward wrist angles and make overhead work less tiring. For remodelers, electricians, plumbers, and punch-list crews, that can matter as much as raw output.

Both tools are part of the M18 FUEL line, so you are getting Milwaukee’s POWERSTATE brushless motor and REDLINK PLUS intelligence. In practical terms, that means better power delivery under load and better electronic control while the tool is working hard. The impact driver’s ULTIMATE TRIGGER CONTROL is especially useful if your day includes both delicate hardware and larger fasteners. Smooth acceleration helps keep small screws from stripping and helps prevent damage to finished materials, which is a big deal when you move from framing hardware to trim, fixtures, or electrical devices in the same day.

On the safety side, the hammer drill includes AutoStop Control Mode to help protect the user from over-rotation in a bind-up. That is one of those features you appreciate most when the bit catches hard in dense stock or when drilling larger holes. Instead of the drill trying to take your wrist with it, the tool is designed to react quickly to a bind event. Milwaukee also notes a dedicated AutoStop light on the foot of the tool to indicate a protection event, which gives the user a clear visual cue that the system stepped in.

This kit is also strong on jobsite practicality because it does not stop at the tools themselves. You get two M18 REDLITHIUM XC 5.0Ah batteries and an M18/M12 multi-voltage charger, which gives you enough runtime and charging flexibility to keep moving. Then there is the storage side. The included PACKOUT Tool Case with Customizable Insert is part of Milwaukee’s PACKOUT Modular Storage System, so it is more than a box to throw in the truck. It has impact-resistant polymer construction, an IP65 rated weather seal, a metal reinforced locking point, reinforced hinge, heavy-duty latches, and a 75 pound weight capacity. The foam insert can be cut to fit your layout, which helps protect the tools and keeps the kit from turning into a rattling mess in transit.

System compatibility is another strong point here. The combo kit is part of the Milwaukee M18 platform, which is stated to be compatible with more than 200 solutions. If you already run M18 batteries and chargers, this kit drops right into that setup. If you are building into Milwaukee cordless tools for the first time, this is a smart starting point because it gives you two core tools you will use constantly, plus batteries and charger that support the larger M18 lineup.

Who should buy it? This setup makes the most sense for contractors and serious DIY users who need a dependable cordless hammer drill and impact driver that can handle daily work without wasting space in the van. It is a strong fit for general construction, remodeling, electrical, plumbing, HVAC, maintenance, and punch work. If you want one kit that covers drilling, anchor holes, screwdriving, and storage in a platform that can grow with you, this Milwaukee combo kit checks the right boxes.

Two Core Tools, One Ready-to-Work Kit

This kit is built around the two cordless tools most pros reach for first: a hammer drill for holes and an impact driver for fasteners. Instead of piecing a setup together, you get the core tools, power, charging, and storage in one package.

• Includes the 2904-20 M18 FUEL 1/2 in. hammer drill and 2953-20 M18 FUEL 1/4 in. hex impact driver
• Comes with (2) M18 REDLITHIUM XC 5.0Ah batteries and an M18/M12 multi-voltage charger

Compact Tools for Tight Spots

Shorter tools are easier to control when the workspace gets cramped. That matters in cabinets, mechanical rooms, under sinks, and above ceiling grids where every inch counts.

• Hammer drill length is only 6.9 in. for better access and reduced fatigue
• Impact driver length is only 4.47 in. with single-handed bit insertion for faster bit changes

PACKOUT Storage That Actually Protects the Kit

The added PACKOUT case is a practical upgrade if your tools ride in a truck, trailer, or gang box. The customizable insert helps keep the layout clean and helps the kit hold up better between jobs.

• PACKOUT case features impact-resistant polymer construction and an IP65 rated weather seal
• 75 lb weight capacity, metal reinforced locking point, reinforced hinge, and heavy-duty latches

What’s in the Box

• (1) Milwaukee M18 FUEL 1/2 in. Hammer Drill (2904-20)
• (1) Milwaukee M18 FUEL 1/4 in. Hex Impact Driver (2953-20)
• (2) Milwaukee M18 REDLITHIUM XC 5.0Ah Batteries
• (1) Milwaukee M18/M12 Multi-Voltage Charger
• (1) Side Handle
• (1) BMC Case
• (1) Milwaukee PACKOUT Tool Case with Customizable Insert (48-22-8450)

Key Specifications

Voltage	18V
Hammer Drill Chuck Size	1/2 in.
Impact Driver Collet Size	1/4 in. hex
Hammer Drill Length	6.9 in.
Impact Driver Length	4.47 in.
Impact Driver Torque	2,000 in-lbs
Impact Driver No-Load Speed	Up to 3,900 RPM
PACKOUT Case Rating	IP65

Compatibility

Battery PlatformPart of the Milwaukee M18 system and compatible with over 200+ M18 solutions. Charger PlatformIncludes an M18/M12 multi-voltage charger for charging Milwaukee M18 and M12 battery packs. Storage SystemThe included 48-22-8450 tool case is part of the PACKOUT Modular Storage System and connects with other PACKOUT components. Tracker MountingPACKOUT case includes a mounting location for the ONE-KEY TICK tool and equipment tracker.

Built For

Construction General Contracting Remodeling Electrical Plumbing HVAC Masonry Anchoring Fastening and Drilling

Pro Tip

Set up the customizable PACKOUT insert around the drill, impact driver, charger, and your most-used bits before the first week on the job. If the kit has a dedicated home, you waste less time hunting for parts and the tools take less abuse in the truck.

At a Glance

2,000 in-lbsImpact Driver Torque 3,900 RPMImpact Driver Speed 6.9 in.Hammer Drill Length 75 lbPACKOUT Case Capacity

Tool Nut’s Take

Tool Nut’s Take

Milwaukee 3697-22 M18 FUEL Gen4 1/2-in. Hammer Drill and 1/4-in. Hex Impact Driver Combo Kit is the kind of starter kit that does not feel like a compromise

You get Milwaukee’s current core drill-and-impact combo, real batteries, and PACKOUT storage that is actually worth having.

• Who it’s for: Pros and serious DIY users who want one cordless combo kit that can drill wood and masonry, drive fasteners fast, and fit into a larger M18 setup.
• Why it stands out: The compact size, AutoStop safety feature on the hammer drill, 2,000 in-lbs impact driver output, and included PACKOUT case make this more useful than a basic boxed combo.
• Worth knowing: This is a strong value if you want tools plus storage in one purchase. If you already own plenty of M18 batteries and cases, part of what you are paying for here is the convenience of the complete kit.

Common Questions

• Is this a cordless combo kit? Yes. It is an 18V Milwaukee M18 combo kit built around cordless hammer drill and impact driver tools.
• Can the hammer drill handle masonry drilling? Yes. It includes a hammer drill mode for fast drilling into brick, block, or concrete.
• What battery platform does it use? It uses the Milwaukee M18 platform and is part of the M18 system that is compatible with over 200+ solutions.
• Does the case connect with other Milwaukee storage? Yes. The included 48-22-8450 case is part of the PACKOUT Modular Storage System.