Key Features
Built to Hold MoreThe Milwaukee 48-22-8497 PACKOUT Large Wall Plate gives you a 150 lb wall-mounted capacity in shop installs and 75 lb in vehicles, so you can hang heavier PACKOUT setups without turning your wall into a weak link. Reinforced Where It CountsMetal-reinforced mounting tracks and an impact-resistant polymer body are there for one reason: secure mounting that holds up in the shop, during transport, and on active jobsites. Fast System LayoutQuick-alignment tabs make it easier to line up rows and columns of multiple plates, which saves time during install and helps you build a cleaner PACKOUT wall storage system from the start.
Overview
The Milwaukee 48-22-8497 PACKOUT Large Wall Plate is a modular wall-mounted storage plate built for organizing PACKOUT gear in shops, garages, trailers, and service vehicles. This is a wall plate designed for mounting and organizing Milwaukee PACKOUT storage and accessories. Model Number: 48-22-8497. If you already use the PACKOUT system and want your tools off the floor and where you can actually reach them, this is the foundation piece that makes that happen.
What matters here is not just that it mounts to a wall, but that it is built to carry real weight. Milwaukee rates this large wall plate at 150 lbs when mounted in the shop and 75 lbs when mounted in vehicles. That gives you enough capacity for loaded organizers, accessory racks, holders, and other PACKOUT wall accessories without babying the setup. For guys building out a work van, trailer, or garage wall, that difference between shop and vehicle ratings is worth paying attention to because it tells you this plate is meant for both static and mobile storage use.
The build is straightforward and jobsite-minded. Milwaukee uses metal-reinforced mounting tracks backed by an impact-resistant polymer body. In plain terms, the reinforcement helps the mounting points handle load better, and the polymer body is there to take daily abuse without cracking up from normal bumps, transport, and shop use. That matters on storage products because they do not fail when they are new. They fail after months of being loaded, unloaded, and knocked around. This design is clearly aimed at avoiding that problem.
One of the more useful features is the quick-alignment tab system. If you are mounting one plate, it helps. If you are mounting several plates in rows or columns, it matters a lot more. Getting multiple wall plates straight the first time saves installation time and gives you a cleaner finished layout, especially if you are building a larger PACKOUT wall across studs in a shop or utility area. It is a simple feature, but it solves a real headache during install.
In terms of size, the Milwaukee 48-22-8497 PACKOUT Large Wall Plate measures 30.75 inches wide, 20 inches high, and 1.2 inches deep. That larger footprint gives you more usable mounting area than smaller plates, which makes it a better fit when you want to centralize chargers, hand tool holders, bins, and tool storage on one section of wall. At 4.5 lbs, it is substantial enough to feel solid without being a hassle to handle during installation.
This wall plate is part of the Milwaukee PACKOUT Modular Storage System, which is the whole reason to buy it. It is not a generic storage board. It is meant to connect with PACKOUT wall accessories and help you build a modular layout around the tools and gear you use every day. If you are already invested in PACKOUT, this lets you extend that system onto vertical surfaces so you can store more, see more, and waste less time digging through stacked boxes.
Who should buy it? Anyone building a serious Milwaukee storage wall. It makes the most sense for mechanics, electricians, plumbers, general contractors, remodelers, and serious DIY users who already own PACKOUT accessories or want to create a cleaner wall-mounted setup in a garage or shop. If you just need a random shelf, this is overkill. If you want organized, modular storage that matches the rest of your PACKOUT setup, this is the right starting point.
Build a Real PACKOUT Wall
This is where the Milwaukee 48-22-8497 PACKOUT Large Wall Plate earns its keep. It gives you a stable base for turning open wall space into organized storage that keeps tools visible, accessible, and off the bench.
- Rated for 150 lbs when wall mounted in a shop
- Designed as part of the Milwaukee PACKOUT Modular Storage System
- Helps organize tools, accessories, and storage solutions on vertical surfaces
Handles Shop and Vehicle Use
Some storage products are fine in a garage and questionable everywhere else. This one is built for shop, transit, and site environments, which makes it more useful for mobile setups and tougher workspaces.
- 75 lb capacity when mounted in vehicles
- Metal-reinforced mounting tracks help keep mounted gear secure
- Impact-resistant polymer body is built for rougher day-to-day use
Large Format, Easier Layout
The larger footprint gives you more room to work with, and the alignment tabs make it easier to set multiple plates in a clean row. That is a big deal when you are planning a full PACKOUT wall instead of just hanging one accessory.
- Overall size: 30.75 in W x 20 in H x 1.2 in D
- Quick-alignment tabs help line up rows and columns of wall plates
- Good fit for larger shop walls, garage bays, and trailer interiors
What’s in the Box
- (1) Milwaukee PACKOUT Large Wall Plate
Key Specifications
| Height | 20 in |
|---|---|
| Width | 30.75 in |
| Depth | 1.2 in |
| Weight | 4.5 lbs |
| Shop Mounted Capacity | 150 lbs |
| Vehicle Mounted Capacity | 75 lbs |
| Body Material | Impact-resistant polymer |
| Mounting Track Construction | Metal-reinforced |
Compatibility
Storage PlatformPart of the Milwaukee PACKOUT Modular Storage System. Wall System AccessoriesBuilt to work with PACKOUT wall storage products and accessories so you can customize your layout around tools, hand tools, batteries, and other jobsite gear.
Built For
Garage Storage Workshop Organization Service Vehicles Trailer Setups General Contracting Electrical Plumbing Remodeling
Pro Tip
If you are building out more than one Milwaukee 48-22-8497 PACKOUT Large Wall Plate, use the quick-alignment tabs to set your first row before loading anything up. Getting the plates straight at install saves you a lot of frustration once the wall starts filling with holders, bins, and heavier PACKOUT pieces.
Warranty & Support
Limited Lifetime Warranty.
Tool Nut’s Take
Tool Nut’s Take
Milwaukee 48-22-8497 PACKOUT Large Wall Plate is the right base for a serious storage wall
If you are already in PACKOUT, this is one of the smartest ways to get your gear organized without giving up floor space.
- Who it’s for: Contractors, mechanics, shop owners, and serious DIY users building a Milwaukee PACKOUT wall in a garage, shop, trailer, or van.
- Why it stands out: The big win is the combination of 150 lb shop capacity, metal-reinforced mounting tracks, and quick-alignment tabs that make multi-plate installs easier.
- Worth knowing: This is a system piece, not a standalone shelf. It makes the most sense if you plan to add PACKOUT wall accessories and build around the platform.
Common Questions
- What is the weight capacity of this wall plate? The Milwaukee PACKOUT Large Wall Plate is rated for 150 lbs when mounted in the shop and 75 lbs when mounted in vehicles.
- Is this part of the PACKOUT system? Yes. It is part of the Milwaukee PACKOUT Modular Storage System and is meant to support a customizable PACKOUT wall storage setup.
- What are the overall dimensions? The plate measures 30.75 inches wide, 20 inches high, and 1.2 inches deep.
- What is it made from? It uses an impact-resistant polymer body with metal-reinforced mounting tracks for added durability and secure mounting.
Reviews
There are no reviews yet.