Key Features
Pressure-Reducing ComfortThick padding and pressure-reducing foam take the edge off long stretches on concrete, gravel, and rough ground. That matters when the job keeps you at floor level for hours. Built for Rough SurfacesThe tear-resistant, non-slip base with non-marring cleats stays put while protecting the pad from jobsite abuse. You get better footing and less sliding when shifting around. PACKOUT IntegrationThe Milwaukee 48-73-6110 kneeling pad is fully compatible with the PACKOUT Modular Storage System, so it is easier to secure, carry, and keep with the rest of your gear instead of getting left behind on site.
Overview
The Milwaukee 48-73-6110 PACKOUT Kneeling Pad is a jobsite kneeling pad built for tradespeople who spend real time on their knees working at floor level. This is a kneeling pad designed for comfort, support, and transport on active jobsites. Model Number 48-73-6110. If you do concrete work, anchor installation, finish work, service calls, or any task that keeps you low to the ground, this pad is meant to cut down on knee fatigue without turning into another loose piece of gear.
The big selling point here is simple: it gives you thick, comfortable padding that is built to hold up. Milwaukee uses pressure-reducing foam that retains its shape, so the pad does not flatten out fast under repeated use. That matters more than it sounds. A kneeling pad that starts soft but compresses after a few weeks is not much help. This one is made to keep providing support over time, which is exactly what you want if you are kneeling on cured concrete, compacted gravel, subfloors, or rough exterior surfaces.
Milwaukee also paid attention to the bottom side, which is where cheap pads usually give up. The base is durable, tear-resistant, and non-slip, with non-marring cleats that help it stay planted while still being usable on a range of surfaces. In plain terms, it is made for real movement on the job. When you shift to reach a fastener, trowel an edge, or drill an anchor, the pad is less likely to skate out from under you. The non-marring design is also useful when you move from rough site conditions into finished or cleaner work areas.
What separates this Milwaukee kneeling pad from a generic foam pad is the PACKOUT connection. It is fully compatible with the Milwaukee PACKOUT Modular Storage System, which makes it easier to secure and transport with the rest of your setup. For contractors already using PACKOUT boxes, totes, or rolling storage, that means the pad becomes part of the system instead of an extra item to carry by hand. It is a practical feature, but it saves hassle every single day.
Size matters with a kneeling pad, and this one gives you enough surface area to move around without feeling cramped. At 18.7 inches long, 13.7 inches wide, and 2.2 inches high, it gives your knees a stable platform while still staying manageable to carry. The 3.26 pound weight is heavy enough to feel substantial and durable, but not so bulky that it becomes annoying to bring along. The Nitrile Butadiene Rubber construction also makes sense here because it is a material that balances cushioning, durability, and resistance to jobsite wear.
This Milwaukee 48-73-6110 PACKOUT Kneeling Pad makes the most sense for concrete crews, electricians, plumbers, HVAC techs, flooring installers, remodelers, and general contractors who work at ground level and already run PACKOUT gear. Serious DIY users will appreciate it too, especially for garage, driveway, tile, and outdoor work. If you just need a throwaway foam pad for occasional use, this is more product than you need. If you want a kneeling pad that is comfortable, durable, and easy to keep with your tools, this one is the smarter buy.
Stay Comfortable on Hard Ground
When the work keeps you down at slab level, knee comfort stops being a luxury and starts being productivity. This pad is built to reduce pressure and help you stay on task longer without constantly shifting around looking for relief.
- Pressure-reducing foam is designed to maintain its shape for lasting comfort
- Thick padding helps on concrete, gravel, and other unforgiving surfaces
Milwaukee 48-73-6110 PACKOUT Kneeling Pad for Rough Jobsite Use
A kneeling pad has to do more than feel soft in the shop. It needs to hold up outdoors, stay put on uneven surfaces, and survive being dragged around active work areas.
- Durable tear-resistant base handles rough site conditions better than basic foam pads
- Non-slip base with non-marring cleats helps the pad stay in place without marking surfaces
Keeps Up with Your PACKOUT Setup
If you already use PACKOUT, this is the kind of accessory that makes the system more useful day to day. The pad travels with your storage instead of bouncing around in the truck or getting forgotten at the last stop.
- Fully compatible with the Milwaukee PACKOUT Modular Storage System
- Easier to secure and transport with the rest of your jobsite gear
What’s in the Box
- (1) Milwaukee PACKOUT Kneeling Pad, Model 48-73-6110
Key Specifications
| Material | Nitrile Butadiene Rubber (NBR) |
|---|---|
| Length | 18.7 in |
| Width | 13.7 in |
| Height | 2.2 in |
| Weight | 3.26 lbs |
| Base Type | Durable, non-slip base with non-marring cleats |
Compatibility
Storage PlatformFully compatible with the Milwaukee PACKOUT Modular Storage System. Surface UseDesigned for use across a variety of surfaces thanks to the durable base and non-marring cleats.
Built For
Construction Concrete Finishing Electrical Plumbing HVAC Remodeling Floor-Level Fastening Service Work
Pro Tip
If you already run PACKOUT, keep this kneeling pad stored with the kit you use for floor-level work instead of tossing it loose in the truck. You will use it more often, and it will be where you need it when you are setting anchors, trimming low runs, or working along slab edges.
Warranty & Support
Limited Lifetime Warranty.
Tool Nut’s Take
Tool Nut’s Take
A Simple Product That Makes Long Days Easier
The Milwaukee 48-73-6110 PACKOUT Kneeling Pad is one of those accessories that does not look flashy, but earns its spot fast once you use it on concrete and rough ground.
- Who it’s for: Contractors, service techs, and serious DIY users who spend regular time working at floor level and want better knee support.
- Why it stands out: It combines lasting cushioning, a tougher non-slip base, and real PACKOUT compatibility instead of being just another loose foam pad.
- Worth knowing: This is a premium kneeling pad built for people who will actually use it often. If you are already in the PACKOUT system, the value makes a lot more sense.
Common Questions
- What is this product made from? The kneeling pad is made from Nitrile Butadiene Rubber, also known as NBR.
- Is this kneeling pad compatible with PACKOUT? Yes. It is fully compatible with the Milwaukee PACKOUT Modular Storage System.
- How large is the pad? It measures 18.7 inches long, 13.7 inches wide, and 2.2 inches high.
- Is the bottom surface slippery? No. It has a durable non-slip base with non-marring cleats for better grip on a variety of surfaces.
Reviews
There are no reviews yet.