Key Features
Fine 0.9 mm MarkingThe slim 0.9 mm lead is built for clean, precise layout lines on wood, plastic, and similar materials. You get sharper marks than a standard carpenter pencil without stopping to sharpen. Refillable Longlife DesignThis Pica Dry marking tool is refillable, so you keep the pencil and swap leads as needed instead of tossing it when it runs out. That saves money and lets you match lead hardness to the job. Jobsite-Ready BodyDust and water protection, a roll stop, and an integrated eraser make this pencil more useful on real jobsites than a basic mechanical pencil. It stays put, keeps working, and lets you correct lines fast.
Overview
Pica Fine Dry 7070 Longlife Automatic Pencil, 0.9 is a refillable marking tool built for fine layout work where a regular carpenter pencil is just too blunt. This is a marking tool designed for precise marking on wood, plastic, and other jobsite materials. Model Number: 7070. If you need clean, controlled lines for joinery, trim, cabinet work, or detailed layout, this is the one you grab.
The big selling point is the 0.9 mm lead diameter. That smaller lead gives you a tighter, more exact mark without sharpening, which matters when you’re transferring measurements, sneaking up on a cut line, or laying out hardware locations. Pica includes 5 graphite HB leads, so it is ready to work right away for general-purpose marking.
Pica also built this pencil like a tool, not like office supply filler. The automatic lead feed runs through a stainless steel tube, which helps with control and durability at the tip. The barrel includes a roll stop so it does not wander off the bench or roof pitch the second you set it down. That sounds small until you have spent enough time chasing pencils across a sheet of plywood.
For jobsite use, the dust and water protection is a real advantage. The push button is designed like an umbrella cap, and the barrel uses a sealing ring to help keep debris and moisture out. That matters on framing sites, in remodel work, and in shops where fine dust gets into everything. It is the kind of detail that keeps the mechanism working instead of turning sticky after a few weeks.
Pica also worked in an integrated large eraser, which is more useful than it sounds. On finish work, punch lists, trim layout, or any time you are marking visible surfaces, being able to quickly clean up a line saves time and keeps the work looking professional. You are not digging through your bags for a separate eraser or wiping marks with your thumb and hoping for the best.
Another practical advantage is that the Pica Fine Dry 7070 Longlife Automatic Pencil is refillable with different leads for different applications. The product data calls out compatibility with refills in different hardness grades, which gives you more flexibility depending on what you are marking and how dark or durable you want that line to be. For users already in the Pica system, that is a straightforward way to keep one pencil body in service.
Who is this for? Carpenters, cabinet installers, finish carpenters, woodworkers, remodelers, and serious DIY users who care about line quality. If your work depends on accurate marking before cutting, drilling, or fitting, this pencil makes more sense than a bulky flat pencil. If you mostly mark rough framing lumber all day and do not care about precision, a standard carpenter pencil may still be cheaper. But for cleaner layout and repeatable accuracy, this Pica earns its place fast.
Make Cleaner Layout Marks
When your mark needs to be exact, the 0.9 mm tip gives you a clear advantage over a bulky carpenter pencil. You get a narrow line that is easier to follow with a saw, drill, or chisel.
- 0.9 mm lead diameter for fine, precise marking
- No sharpening needed during normal use
- Good fit for trim, cabinetry, woodworking, and detailed layout
Built for Real Jobsite Conditions
This is not just a shop pencil. The protected design helps keep dust and moisture out of the mechanism, so it is better suited for vans, bags, benches, and active jobsites than a basic mechanical pencil.
- Push button umbrella cap and sealing ring help protect against dust and water
- Roll stop keeps the pencil from rolling away when set down
- Automatic lead feed in a stainless steel tube supports controlled marking
Easy to Use, Easy to Keep in Service
Pica added the details that make a marking tool worth carrying every day. A grippy body helps control, the integrated eraser speeds up corrections, and the refillable design means you do not throw the whole pencil away when the lead is gone.
- Integrated large eraser for quick corrections
- Refillable design with different lead options
- Supplied with 5 graphite HB leads
Key Specifications
| Tool Type | Marking Tool / Automatic Pencil |
|---|---|
| Model Number | 7070 |
| Lead Diameter | 0.9 mm |
| Included Lead Hardness | HB |
| Included Lead Quantity | 5 leads |
| Construction | Plastic body with stainless steel tube |
| Weight | 0.04 kg |
| Color | Black / Green |
Compatibility
Lead Size Designed around 0.9 mm lead for fine marking applications. Refill System Refillable with different Pica lead options and hardness grades for different marking needs. Typical Materials Well suited for marking wood, plastic, and other surfaces where a fine visible line matters.
Built For
CarpentryFinish CarpentryCabinet InstallationWoodworkingRemodelingPlumbing LayoutGeneral ContractingDIY / Hobbyist
Pro Tip
Use the included HB lead for everyday wood layout, then switch to a harder refill when you want a finer, lighter line that does not smear as easily on smoother materials. That is one of the main reasons to buy a refillable pencil like this instead of a throwaway marker.
Tool Nut’s Take
Tool Nut’s Take
Pica Fine Dry 7070 Longlife Automatic Pencil, 0.9 is the right call when your layout line actually matters
This is a smart upgrade for anyone tired of fat pencil lines, constant sharpening, and cheap mechanical pencils that quit when the dust shows up.
- Who it’s for: Carpenters, cabinet guys, trim crews, woodworkers, remodelers, and detail-focused DIY users who want precise marking.
- Why it stands out: The 0.9 mm lead gives a much cleaner line, and the dust and water protection plus refillable design make it feel like an actual trade tool.
- Worth knowing: This is about precision, not heavy rough marking. If you mostly scribble on rough framing lumber, a regular carpenter pencil is still cheaper. If accuracy matters, this one makes a lot more sense.
Common Questions
- Does this pencil need sharpening? No. The Pica Fine Dry 7070 uses a 0.9 mm automatic lead feed, so it is designed to mark precisely without sharpening.
- Is it refillable? Yes. The product data states that it is refillable and supports different lead options and hardness grades.
- Does it include lead to get started? Yes. It comes equipped with 5 graphite HB leads.
- Is this better for fine work than a standard carpenter pencil? Yes. The narrower 0.9 mm lead is intended for finer, more precise marking where a thick line can reduce accuracy.
Reviews
There are no reviews yet.