Key Features
Locks In SquareOnce aligned, the fence locks parallel to the blade for repeatable rip cuts without constant checking and tweaking. Slides for Safer SetupsThe fence face moves forward and back, so you can use the back end as a stop block for repeatable crosscuts while reducing the chance of pinching the offcut between fence and blade. Accessory-Ready Rip FenceA dovetail-shaped slot lets you mount feather boards, sacrificial fences, and shop-made jigs quickly without extra modification.
Overview
The SawStop ATGI-FA Industrial T-Glide Advance Rip Fence is a premium rip fence upgrade for the SawStop Industrial Cabinet Saw. This is a rip fence designed for accurate, repeatable table saw ripping and safer stop-block crosscut setups. If you already run a SawStop ICS with T-Glide rails and want a fence that adds more control, more flexibility, and less fuss at setup time, this is the one to look at. Model Number: ATGI-FA.
What makes this fence different is not just that it locks down solid. It is the way the fence face is built to work in real shop situations. The hi-low aluminum face can be used in two positions, which gives you more clearance options depending on the cut and workpiece. Separate scale indicators for the high and low positions help keep setup straightforward, so you are not second-guessing measurements every time you change configurations.
The forward-and-back sliding fence face is one of the most useful features here. It allows the tail end of the fence to work as a stop block for repeatable crosscuts without trapping the cutoff between the blade and fence. That matters because it helps reduce offcut pinching and the kickback risk that can come with a bad stop setup on a table saw. For cabinet work, parts batching, and repeat dimension work, that is a practical upgrade you will actually use.
SawStop also gave this fence a dead-flat aluminum fence face that will not warp over time like lower-grade alternatives can. In day-to-day use, that means more dependable reference along the workpiece and less chance of chasing inconsistency caused by a fence that is no longer true. The reversible fence face can also be swapped to the right side of the T-Glide tube for use on the left side of the blade, which adds flexibility for specialty setups and workflow preferences.
For shop durability, the tube is supported by rollers at the tail end so it glides smoothly across the cast-iron tabletop and helps reduce wear marks. That is a small detail, but it is the kind of thing you appreciate on a heavy-use industrial saw where smooth movement and long-term table condition both matter. The dovetail-shaped slot also gives you a clean, secure place to mount feather boards, sacrificial fences, and other jigs without cobbling together a workaround.
Compatibility is simple and important here: this fence is made for the SawStop Industrial Cabinet Saw (ICS) and installs on existing SawStop T-Glide fence rails with no conversion or modification needed. That makes it a straightforward upgrade path for current ICS owners who want more capability without rebuilding the whole fence system.
The SawStop ATGI-FA Industrial T-Glide Advance Rip Fence is best for cabinet shops, furniture builders, school shops, production woodworkers, and serious home shops running an ICS platform. If your work depends on accurate rip cuts, repeatable part sizing, accessory mounting, and clean fence movement across a cast-iron top, this fence solves real workflow problems instead of just looking good on paper.
Safer Repeat Crosscuts on the Table Saw
The sliding fence face is the feature that changes how this fence works in the shop. Move the face forward, use the tail end as a stop, and you can batch out repeat cuts with better control and less chance of trapping the offcut.
- Fence face slides forward of the blade for stop-block style setups
- Helps reduce offcut pinching compared with using a full-length fence as a hard stop
Use High or Low Fence Support
The hi-low aluminum fence face gives you two working positions, which makes the fence more useful across different material sizes and cut types. It is a practical feature when you want support where you need it without getting in the way where you do not.
- Hi-low face can be used in either position
- Separate scale indicators help keep fence readings clear after repositioning
Built for Smooth Movement and Shop Wear
On a heavy cast-iron saw, fence movement matters. SawStop added rollers at the tail end of the tube so the fence glides across the table more smoothly and helps cut down on wear marks over time.
- Twin rollers support the tube tail during movement
- Designed to glide across cast iron with less drag
Ready for Jigs, Feather Boards, and Specialty Work
A good fence needs to do more than guide a board. The dovetail-shaped slot makes this fence easier to adapt for feather boards, sacrificial faces, and custom jigs, so you can set the saw up for the task instead of working around the fence.
- Dovetail-shaped slot supports quick mounting of accessories and jigs
- Installs on existing SawStop T-Glide rails with no modification needed
What’s in the Box
- (1) SawStop ATGI-FA Industrial T-Glide Advance Rip Fence
Requires SawStop T-Glide fence rails. Saw not included.
Key Specifications
| Part Number | ATGI-FA |
|---|---|
| Overall Size | 48 in L x 16 in W x 5 in H |
| Weight | 24 lbs |
| Fence Face Material | Aluminum |
| Aluminum Fence Face Dimensions | 41 in L x 1-1/8 in W x 2-3/4 in H |
| Tube Dimensions | 41-1/4 in L x 3 in W x 2 in H |
| Dovetail Slot Size | 5/16 in at narrow point; 1/2 in at widest point |
| Warranty | 2 Years |
Compatibility
Saw CompatibilityCompatible with the SawStop Industrial Cabinet Saw (ICS). Fence Rail SystemFits existing SawStop T-Glide fence rails with no conversion or modification needed. Accessory MountingDovetail-shaped slot accepts feather boards, sacrificial fences, and other compatible jigs and accessories.
Built For
Woodworking Cabinet Shops Furniture Building Production Ripping Repeat Crosscut Setups Jig and Fixture Work School Shops Serious Home Shops
Pro Tip
If you are cutting repeat-length parts, slide the fence face forward and use the back end as your stop instead of trapping the cutoff along the full fence. That setup is one of the biggest reasons to buy the Advance fence in the first place.
Warranty & Support
SawStop lists this product with a 2-year warranty.
Tool Nut’s Take
Tool Nut’s Take
Why the SawStop ATGI-FA Industrial T-Glide Advance Rip Fence Earns Its Spot
This is the kind of upgrade that makes an already serious cabinet saw feel more dialed in, more flexible, and easier to trust on repeat work.
- Who it’s for: ICS owners doing cabinet parts, furniture work, production ripping, or any job where repeatability and fence-mounted accessories matter.
- Why it stands out: The sliding fence face, hi-low aluminum setup, dovetail accessory slot, and smooth roller-supported glide add real shop value beyond a standard rip fence.
- Worth knowing: This is not a universal table saw fence. It is built to work with the SawStop Industrial Cabinet Saw and existing T-Glide rails.
Common Questions
- What saw does this fence fit? It is compatible with the SawStop Industrial Cabinet Saw (ICS).
- Does it require modifications to install? No. It fits onto existing SawStop T-Glide fence rails with no conversion or modification needed.
- Can it be used with feather boards or sacrificial fences? Yes. The fence includes a dovetail-shaped slot for mounting feather boards, sacrificial fences, and other jigs or accessories.
- What is the benefit of the sliding fence face? It lets the fence face move forward of the blade so you can set up repeatable crosscuts more safely by reducing the chance of pinching the offcut between the fence and blade.
Reviews
There are no reviews yet.