Key Features
Clean, True-Size DadosThe 24-tooth outer blades and flat-grind chippers are built to leave flatter bottoms and cleaner shoulders. That matters when you are fitting shelves, dividers, and joinery that actually needs to go together without fussing with a chisel afterward. Wide Cut RangeWith five chippers and six shims, this stacked dado blade set covers cuts from 1/4 inch up to 29/32 inch. You get the flexibility to dial in common dado widths instead of settling for close enough. Shop-Ready StorageThe included plastic case keeps the blades, chippers, and shims together so setup parts do not walk off between jobs. For anyone swapping back and forth between a standard blade and a dado stack, that saves time fast.
Overview
The SawStop BTS-DS8-2402 Premium 8-in. Dado Set is a stacked dado blade set for table saws that need clean, accurate grooves, dados, and rabbets in wood. This is a stacked dado blade set designed for cutting grooves, dados, and rabbets in hardwood, softwood, and sheet goods. Model number BTS-DS8-2402. If you care about fit, flat-bottom cuts, and repeatable setup, this is the kind of accessory that makes a table saw a lot more useful in the shop.
What separates this set from a bargain dado stack is how it builds the cut. SawStop uses 24-tooth outer blades paired with flat-grind chippers, which is exactly what you want when the goal is a clean shoulder and a bottom that does not look washboarded. The result is a better fit for casework, shelving, cabinet backs, drawer dividers, and joinery where sloppy dados turn into glue-up problems later.
The cut range is another big reason this set makes sense. You can build widths from 1/4 inch to 29/32 inch, and SawStop includes five chippers plus six shims to fine-tune the stack. That means you are not locked into a couple preset widths. When plywood runs undersize or you need to sneak up on a fit, the included shim selection gives you the adjustment range to do it right.
On the blade geometry side, the -5 degree hook angle is there for a reason. It helps reduce chipping and tear-out, especially when working with veneered sheet goods or hardwood faces where edge quality matters. It also makes the cut feel a little more controlled compared to more aggressive hook angles. For woodworkers doing cabinetry or trim components, that is a worthwhile trade.
The core size and speed rating are job-critical details, not filler specs. This set uses a 5/8 inch arbor and is rated for up to 6000 RPM. The blades are 8 inches in diameter, which is the standard size a lot of serious table saw users look for in a dado stack. If your saw is set up for dado work and your arbor and throat plate support it, those are the numbers you need to confirm before buying.
Storage is handled well too. The included plastic case keeps the outer blades, chippers, and shims organized instead of loose in a drawer where the thin pieces get mixed up or damaged. That sounds small until you are changing setups in the middle of a project and need the right chipper or shim without hunting around the bench.
In the SawStop system, this dado set is listed as compatible with ICS, PCS, CNS, and JSS saw models. That makes it a natural fit for SawStop owners who want a matched accessory from the same brand. It is also described for 10-inch table saws with dado capacity up to 29/32 inch, so compatibility comes down to your saw’s arbor, clearance, and dado capacity. Always verify that before stacking blades.
Who should buy it? Woodworkers, cabinet installers, finish carpenters, and serious DIY users who use a table saw for more than rough ripping. If you build cabinets, bookcases, shop furniture, drawer boxes, or frame-and-panel work, a premium dado set pays for itself in fit and finish. If you only cut an occasional rough dado in construction lumber, a lower-cost set might get by. But if clean joinery is the point, this one earns its keep.
Keep Your Dado Setup Organized
A dado set is only convenient if the small parts stay together. The included case keeps the stack organized so you can swap setups without wasting time looking for the right chipper or shim.
- Plastic case included for blade, chipper, and shim storage
- Built for repeated changeovers between standard blade work and dado cutting
Dial In the Width You Actually Need
This set is made for real fit-up work, not just rough grooves. Multiple chippers and shims let you tune the stack for undersized plywood, hardwood joinery, and shelf dados that need to land right without extra trimming.
- Cutting range from 1/4 inch to 29/32 inch
- Includes 5 chippers and 6 shims for width flexibility
SawStop BTS-DS8-2402 Premium 8-in. Dado Set Blade Geometry That Favors Clean Cuts
Blade geometry matters more than most people think. The 24-tooth outer blades, flat-grind chippers, and negative hook angle are aimed at cleaner shoulders, less tear-out, and better-looking dados in visible work.
- 24-tooth outer blades for accurate shoulders
- -5 degree hook angle helps reduce chipping
What’s in the Box
- (2) 8 in. 24-tooth outer blades
- (5) chippers
- (6) shims
- (1) plastic storage case
Dado brake cartridge is sold separately.
Key Specifications
| Diameter | 8 in. |
|---|---|
| Arbor Size | 5/8 in. |
| Outer Blade Tooth Count | 24 teeth |
| Cutting Range | 1/4 in. to 29/32 in. |
| Hook Angle | -5 degrees |
| Maximum Speed | 6000 RPM |
| Chipper Count | 5 |
| Weight | 8.2 lbs |
Compatibility
SawStop Table Saw Models Listed as compatible with SawStop ICS, PCS, CNS, and JSS models. Arbor Fit Uses a 5/8 in. arbor on all blades. Saw Capacity Requirement Intended for 10 in. table saws with dado capacity of 29/32 in. or less.
Built For
WoodworkingCabinetryFinish CarpentryShop FurnitureShelf DadosRabbets and GroovesHardwood and SoftwoodSheet Goods
Pro Tip
When you are fitting plywood, do not assume the nominal thickness is exact. Use the included shims to sneak up on the fit with a test cut first, and this dado stack will save you a lot of sanding, planing, or loose joints later.
Warranty & Support
1 year warranty.
Tool Nut’s Take
Tool Nut’s Take
A dado set for woodworkers who actually care about fit
The SawStop BTS-DS8-2402 Premium 8-in. Dado Set is the kind of accessory that makes sense when your table saw is doing real joinery work, not just rough cuts.
- Who it’s for: Cabinetmakers, trim carpenters, furniture builders, and serious DIY users cutting dados and rabbets that need to fit cleanly.
- Why it stands out: The combination of 24-tooth outer blades, flat-grind chippers, a negative 5 degree hook angle, and a wide 1/4 in. to 29/32 in. range gives you the control and cut quality people usually wish they had after buying a cheaper stack.
- Worth knowing: This is only a good buy if your saw is set up to run a dado stack. Check arbor size, throat plate, and dado capacity first, because a premium set does not help if your saw cannot use it properly.
Common Questions
- What kind of tool is this? This is a stacked dado blade set for table saws, made for cutting grooves, dados, and rabbets in wood.
- What saws is it listed as compatible with? It is listed as compatible with SawStop ICS, PCS, CNS, and JSS models.
- What is the maximum dado width this set can cut? The cutting range is 1/4 in. to 29/32 in.
- What arbor size does it use? All blades in the set use a 5/8 in. arbor.
Reviews
There are no reviews yet.