Stabila 07530 Receiver Bracket for REC 300 Digital Rotating Laser Receiver

Key Features

Stabila 07530 receiver bracket A laser receiver bracket designed to mount a rotating laser receiver on an elevation rod, so you can keep the receiver where you need it while you work the grade rod. Fits wider rods Accommodates measuring rods up to 3 inches wide, which covers the common grade and elevation rods you see on site. Hard plastic body Hard plastic construction takes jobsite bumps without turning into a sloppy, loose mount that throws off your readings.

Overview

The Stabila 07530 Receiver Bracket is a laser receiver bracket for mounting a rotating laser receiver on a measuring rod. This is a receiver mounting bracket designed for grade checking and elevation work with rotating laser receivers. Model Number: 07530.

On the job, the whole point of a bracket like this is keeping the receiver stable and readable while you move the rod. The Stabila 07530 bracket clamps to an elevation rod and holds the receiver in a consistent position, so you are not fighting a loose setup when you are chasing grade.

Rod fit matters because not every rod is the same width. This bracket accommodates measuring rods up to 3 inches wide, which is a practical spec if you are swapping between different rods on the same crew or working with a wider profile grade rod.

Material matters because the bracket is always getting tossed in a truck box or knocked around near the tripod. Stabila calls out hard plastic components for durability, which is what you want for a bracket that gets clamped and unclamped all day.

Receiver compatibility is the buying decision. This bracket is listed as compatible with the Stabila REC 150 and Stabila REC 300 rotating laser receivers, so it is a fit if you are already running those receivers and need a replacement bracket or a second setup for another rod.

If you run rotating lasers for site layout, concrete, excavation, or general leveling, this is the small accessory that keeps your receiver setup clean and repeatable. If you do not use a rod-mounted receiver setup, you will not get much value out of it.

Secure Rod Mounting for Grade Work

When you are checking grade, a receiver that shifts on the rod costs time and confidence. This bracket is made to clamp onto an elevation rod so the receiver stays put while you move and read.

• Designed to mount rotating laser receivers on a measuring rod for layout and elevation work
• Clamp-style bracket for quick positioning and re-positioning on the rod

Receiver Fit You Can See

This bracket is meant to match the receiver body and keep it in a readable position on the rod. That is what makes it a replacement bracket instead of a universal clamp that never quite fits right.

• Compatible with Stabila REC 150 and Stabila REC 300 receivers
• Built to hold the receiver for “perfect viewing” while you work the rod

Takes the Jobsite Abuse

Receiver brackets get cranked down, dropped, and stuffed in cases. The hard plastic construction is there to keep the clamp and receiver mount from turning into a wobbly mess.

• Hard plastic components for durability
• Adjustable clamping knobs for tightening to the rod

What’s in the Box

• (1) Receiver bracket

Key Specifications

Model	07530
Material	Hard plastic
Measuring Rod Capacity	Up to 3 in wide
Weight	0.35 lbs

Compatibility

Rotating Laser Receivers Compatible with Stabila REC 150 and Stabila REC 300 rotating laser receivers. Measuring Rods Fits measuring and elevation rods up to 3 inches wide.

Built For

Construction Masonry Concrete Excavation and grading Site layout Elevation checks with a grade rod

Warranty & Support

30-day manufacturer’s warranty.

Tool Nut’s Take

Tool Nut’s Take

Stabila 07530 Receiver Bracket: the fix for a sloppy receiver setup

If your REC receiver is shifting on the rod, this is the right replacement bracket to get your readings steady again.

• Who it’s for: Anyone running a Stabila REC 150 or REC 300 rotating laser receiver on a measuring rod for grade and elevation checks.
• Why it stands out: Built for the receiver and rod setup, with a stated 3-inch rod capacity and durable hard plastic construction.
• Worth knowing: This is the bracket only, so it is meant as a replacement or spare, not a full receiver kit.

Common Questions

• What receivers does this bracket fit? It is listed as compatible with Stabila REC 150 and Stabila REC 300 rotating laser receivers.
• What size measuring rod can it clamp onto? It accommodates measuring rods up to 3 inches wide.
• What is it made from? Hard plastic components.