Key Features
Compact Tech StorageThe Veto Pro Pac TECH-MCT BLACKOUT tool bag keeps meters, testers, and hand tools organized in a compact footprint that is easier to carry into service calls and tight work areas. V-SWAP Panel SystemThe removable tool and meter panels let you change the bag setup to match the job, so you are not stuck carrying the same layout every day. Built For Jobsite WearA waterproof 3 mm polypropylene base, padded shoulder strap, and fold-flat ergonomic handle help the bag hold up better when it is set down, moved around, and loaded hard.
Overview
The Veto Pro Pac TECH-MCT BLACKOUT tool bag, model VPP10230, is a compact service tool bag built for technicians who need organized storage for meters, testers, and everyday hand tools without dragging a full-size bag around. This is a tool bag designed for carrying, organizing, and protecting diagnostic gear and hand tools on service calls. If you work in electrical, HVAC, low-voltage, maintenance, or general troubleshooting, this setup makes a lot of sense.
What makes this bag different is the V-SWAP removable tool pocket panel system. The TECH-MCT BLACKOUT comes with both a tool panel and a meter panel, so you can run one layout for general service work and swap to a different setup when the job calls for more testing gear. That matters when your loadout changes from install work to diagnostics, because you can reconfigure the bag instead of digging through one fixed pocket layout.
Storage is the real story here. With 44 interior and exterior pockets and room for over 50 hand tools, the bag is built to separate the small stuff that usually ends up piled together. There are dedicated neoprene pockets for meters and testers, plus an electric tape strap for one of the items that usually gets buried when you need it fast. The 800 cubic inch interior volume gives you useful capacity without pushing the bag into oversized territory.
The overall size also hits a practical middle ground. At 14 inches high, 12 inches wide, and 8.5 inches deep, this Veto Pro Pac bag stays compact enough for tight service spaces, but it still carries a serious amount of gear. Empty weight is 7 lbs, so it has enough structure to stand up to daily use without getting too heavy before you load it.
On the durability side, Veto gave the TECH-MCT BLACKOUT a waterproof 3 mm polypropylene base. That matters more than it sounds on a real jobsite, because service bags spend plenty of time on damp concrete, dirty floors, truck beds, and rough surfaces. The bag also uses an articulating fold-flat handle with an over-molded ergonomic grip, which makes it easier to grab, move, and set down cleanly in cramped areas. When you are carrying it farther, the extra wide padded shoulder strap helps spread the load better.
Compatibility is another strong point. Because this is part of the V-SWAP system, you are not locked into the two included panels forever. Alternate V-SWAP panels are available separately for users who want a more specialized setup. That gives this tool storage bag more long-term value than a fixed-layout service bag, especially for techs whose work changes from day to day.
Who should buy it? The Veto Pro Pac TECH-MCT BLACKOUT tool bag is a smart pick for service pros who need a compact, durable technician bag with better organization than a basic tote. It is especially well suited for electrical troubleshooting, HVAC service, low-voltage work, and maintenance calls where meters, testers, and small hand tools need to stay protected, visible, and easy to grab.
Built for Service Calls and Tight Work Areas
This compact technician bag is sized for the gear you actually carry on troubleshooting and maintenance calls, not the extra bulk you leave in the truck.
- 14 in H x 12 in W x 8.5 in D keeps the footprint manageable in finished spaces and mechanical rooms
- 44 interior and exterior pockets help separate tools, testers, and small essentials instead of stacking them in one main compartment
Configured for Tools Today, Flexible for Tomorrow
The included V-SWAP panels make this bag more adaptable than a fixed-layout tool bag. If your loadout changes by trade, task, or season, that flexibility is worth paying for.
- Includes removable tool panel and meter panel
- Alternate V-SWAP panels are available separately for different storage layouts
What’s in the Box
- (1) Veto Pro Pac TECH-MCT BLACKOUT tool bag
- (1) V-SWAP tool panel
- (1) V-SWAP meter panel
Additional V-SWAP panels are sold separately.
Key Specifications
| Height | 14 in (35.5 cm) |
|---|---|
| Width | 12 in (30.5 cm) |
| Depth | 8.5 in (21.5 cm) |
| Handle Height | 17 in (43 cm) |
| Weight | 7 lbs (3 kg) |
| Internal Volume | 800 cu in (13 L) |
| Max Payload | 35 lbs (16 kg) |
| Pocket Count | 44 interior and exterior pockets |
Compatibility
Panel System Compatible with Veto Pro Pac V-SWAP removable and exchangeable tool pocket panels. Included Panel Setup Ships with one tool panel and one meter panel installed for technician-focused storage right out of the box. Expansion Options Alternate V-SWAP panels are available separately if you want to tailor the bag for different service kits or tool layouts.
Built For
ElectricalHVACLow-Voltage ServiceMaintenanceGeneral ContractingTroubleshootingMeter and Tester StorageHand Tool Organization
Pro Tip
Set up one V-SWAP panel for everyday hand tools and keep the meter panel dedicated to diagnostic gear. That way you can swap the bag from install mode to service mode without rebuilding your whole loadout.
Warranty & Support
5-year warranty. See Veto Pro Pac warranty terms and conditions for full coverage details.
Tool Nut’s Take
Tool Nut’s Take
Veto Pro Pac TECH-MCT BLACKOUT tool bag for techs who hate wasted space
This is the kind of compact technician bag that earns its keep fast because it carries a real service loadout without turning into a bulky box.
- Who it’s for: Techs and service pros carrying meters, testers, and hand tools for electrical, HVAC, maintenance, and troubleshooting work.
- Why it stands out: The V-SWAP panel system gives you flexibility that most fixed-pocket service bags do not, and the waterproof base is a big plus in the real world.
- Worth knowing: This bag ships with the tool and meter panels, but alternate panel setups cost extra if you want to build out a more specialized kit.
Common Questions
- Does this bag come with V-SWAP panels? Yes. It comes with one tool panel and one meter panel.
- Can the panel setup be changed later? Yes. It uses Veto Pro Pac’s V-SWAP removable and exchangeable panel system, and alternate panels are available separately.
- How much weight can it carry? The listed maximum payload is 35 lbs (16 kg).
- How many tools can it hold? Veto states it holds over 50 hand tools, with 44 interior and exterior pockets of varying sizes.
Reviews
There are no reviews yet.