Key Features
Foam Layout ControlThe two-color foam insert gives every tool its own spot, so missing pieces stand out fast. That matters in a busy shop where lost time usually starts with hunting for the right key. 20-Piece CoverageThis Wera foam insert set combines metric hex keys, Torx keys, a magnet, and a 3 m tape measure in one drawer-ready layout. You get common service and assembly tools grouped together instead of scattered across the box. Shop-Ready InsertThe foam is water- and oil-repellent, low maintenance, and built to protect tools from dirt and impact. That makes it a practical fit for service carts, workshop drawers, and everyday carry inside a cabinet system.
Overview
The Wera 05150140001 9740 Foam Insert L-Key Set 1, 20 Pieces is a drawer-ready tool organization and service set built around Wera L-keys, a magnet, and a tape measure. This is a foam insert L-key set designed for organized fastening, tool control, and workshop storage. Model Number: 05150140001. If you want a clean layout in a service cart or cabinet and you need both hex and Torx coverage in one place, this setup makes sense.
What makes this set useful is not just the number of pieces, but how the pieces are grouped. You get a 9-piece Wera 950/9 Hex-Plus Multicolour 1 set for hex socket screws, a 9-piece Wera 967/9 TX XL Multicolour 1 set for Torx screws, one 9500 magnet, and one Stabila BM 100 3 m pocket tape measure. In plain terms, that means the insert handles a wide range of common machine, equipment, and general service fasteners while also giving you a magnet for retrieval and a tape for quick measurements.
The foam insert itself is a big part of the value here. Wera calls out a durable, high-quality foam with no chemical vapours, plus water- and oil-repellent construction. Each tool has a dedicated cutout with an optimum fit, so removal is easy without the loose, sloppy feel you get from generic tray systems. The two-color foam is not just for looks. When a tool is missing, you notice it immediately, which helps with inventory control and keeps a drawer from turning into a junk pile.
The included L-keys are laid out for quick access and easy size recognition. The multicolour sleeves help separate sizes at a glance, which is useful when you are moving between fasteners and do not want to stop to read tiny markings every time. The metric hex selection runs from 1.5 mm up to 10.0 mm, and the Torx selection runs from Torx 8 up to Torx 40. That gives the set real coverage for maintenance, adjustment, and assembly work rather than forcing you back to the tool chest for the next size up.
From a practical shop-use standpoint, this is built for controlled storage. The insert is intended for the Tool Rebel roller cabinet, and the product data specifically notes that it does not fit the previous workshop trolley model 05501051001. That kind of compatibility detail matters because foam systems are only useful when they actually drop into the intended drawer layout without modification.
The overall insert size is listed as 172.0 x 30.0 x 392.0, and the Amazon product details list the full item dimensions as 15.43 x 6.77 x 1.73 inches with an item weight of 1 lb. This is not a grab-and-go roadside tool roll. It is a workshop organization solution for users who want repeatable storage, faster tool checks, and a cleaner drawer system.
Who should buy it? This set is best for mechanics, maintenance techs, machine service users, and anyone building out a Wera Tool Rebel cabinet with purpose-built drawer organization. Serious DIY users can benefit too, especially if they care about tool control and want a dedicated tool set for hex and Torx fastening. If you are just looking for loose L-keys, there are cheaper ways to buy them. If you want a systemized insert that keeps the drawer organized and ready to work, this is the better play.
Drawer Organization You Can Actually Use
This set is about speed and control as much as it is about the tools themselves. Everything has a fixed location, so setup is cleaner and end-of-job tool checks take seconds instead of minutes.
- Two-color foam makes missing tools easy to spot
- Dedicated cutouts help keep the drawer consistent day after day
Built Around Real Service Work
Wera did not fill this insert with random extras. The magnet helps retrieve small hardware, and the 3 m Stabila tape covers quick measuring jobs without sending you back to another drawer.
- Includes one 9500 magnet SB and one Stabila BM 100 3 m tape measure
- Pairs fastening tools with measurement and pickup capability in one layout
Fast Size Identification
The multicolour sleeves help you grab the right key quicker, especially when you are bouncing between sizes. That is a small thing until you do it all day.
- Metric hex key set covers 1.5 mm through 10.0 mm
- Torx key set covers Torx 8 through Torx 40
What’s in the Box
- (1) 9740 Foam Insert
- (1) 950/9 Hex-Plus Multicolour 1 L-key set, 9 pieces
- (1) 967/9 TX XL Multicolour 1 L-key set, 9 pieces
- (1) 9500 Magnet SB
- (1) Stabila BM 100 pocket tape measure, 3 m
Key Specifications
| Piece Count | 20 Pieces |
|---|---|
| Tool Types Included | Metric hex L-keys, Torx L-keys, magnet, tape measure |
| Metric Hex Sizes | 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0 mm |
| Torx Sizes | Torx 8, 9, 10, 15, 20, 25, 27, 30, 40 |
| Tape Measure Length | 3 m |
| Foam Insert Size | 172.0 x 30.0 x 392.0 mm |
| Item Dimensions | 15.43 x 6.77 x 1.73 in |
| Weight | 1 lb |
Compatibility
Cabinet FitSuitable for the Wera Tool Rebel roller cabinet. Fit NoteThe foam insert does not fit the previous workshop trolley model 05501051001.
Built For
Mechanical Service Workshop Storage Equipment Maintenance Assembly Work General Contracting DIY / Hobbyist
Pro Tip
Use the two-color foam as a fast end-of-day inventory check. If a cutout shows through, you know right away what did not make it back into the drawer before the cart gets rolled to the next job.
Tool Nut’s Take
Tool Nut’s Take
Wera 05150140001 9740 Foam Insert L-Key Set 1 keeps the drawer honest
This is the kind of set that makes sense when you are tired of loose keys floating around a service cart and wasting your time.
- Who it’s for: Mechanics, maintenance techs, and organized DIY users building out a proper workshop drawer system.
- Why it stands out: You get real hex and Torx coverage, plus a magnet and tape measure, all in a durable foam insert that makes missing tools obvious.
- Worth knowing: This is best if you want system storage, not just a handful of loose L-keys. Also, Wera specifically notes it does not fit the older 05501051001 workshop trolley.
Common Questions
- What fastener types does this set cover? It includes metric hex L-keys for hex socket screws and Torx L-keys for Torx screws.
- Does this fit every Wera workshop trolley? No. It is suitable for the Tool Rebel roller cabinet, and the product data states it does not fit the previous model 05501051001.
- Is the foam insert just for storage, or does it help with tool control? It does both. Each tool has its own cutout, and the two-color foam makes missing pieces easy to spot.
- Is the insert easy to maintain in a shop environment? Yes. The foam is described as water- and oil-repellent, low maintenance, and easy to clean.
Reviews
There are no reviews yet.