Key Features
Safer Narrow Rips Used as a low fence, it reduces interference between the fence and your push block so you can handle thin stock and narrow rip cuts with better control. Fast On, Fast Off The Woodpeckers Auxiliary Rip Fence clamps to a table saw fence quickly, then comes off in seconds when you need to go back to your stock fence. Made in USA Built by Woodpeckers in the USA for woodworkers who want a purpose-built table saw fence accessory instead of a shop-made workaround.
Overview
The Woodpeckers ARF-48 Auxiliary Rip Fence is a table saw fence accessory made to mount to your existing rip fence for safer, more controlled cutting operations. This is a table saw auxiliary rip fence designed for narrow ripping and thin-material support. Model Number ARF-48. If you do repeat table saw work and want a fence setup that is easier to work around with push blocks and specialty cuts, this is the kind of add-on that earns its spot in the shop.
What matters here is how it changes the way your saw fence behaves. The images show the Auxiliary Rip Fence clamped to a standard table saw fence, with the setup described as easy to install, quick to remove, and just as quick to reinstall. That makes it practical for real work instead of something you only bolt on once in a while. When you need the stock fence for a cut, you can switch back without wasting time.
The biggest functional advantage shown is low-fence use. A lower fence profile reduces interference between the fence and your push block, which is exactly what you want when making narrow rips on thin material. That matters for control and consistency, especially when you are working close to the blade and need a cleaner path for the workpiece and your hands-on safety tools. For woodworkers doing trim parts, thin strips, or small stock processing, that is a real benefit, not a brochure feature.
Woodpeckers also built this as a dedicated solution instead of asking you to improvise with plywood faces and shop clamps. The product images show a rigid auxiliary face supported by mounting blocks, giving you a straight, repeatable working surface across the fence. That is the kind of setup that makes specialty table saw operations more predictable and easier to repeat from one cut to the next.
On compatibility and shop setup, the product is shown attaching to a table saw rip fence with Semble clamps, and the images clearly note that the clamps are sold separately. There is also a separate 7 inch material support accessory shown, identified as ARF-MS. That tells you this fence is part of a broader workholding and support setup rather than a one-piece, everything-included kit. If you already use Woodpeckers accessories or want to build out a more capable fence system, that is useful to know before you order.
The Woodpeckers ARF-48 Auxiliary Rip Fence makes the most sense for serious woodworking shops, cabinet and furniture builders, trim carpenters, and advanced DIY users who spend enough time at the table saw to appreciate better control and faster setup changes. If you only rip sheet goods once in a while, you may not need it. If you regularly cut thin strips, narrow parts, or small workpieces and want a cleaner, more repeatable fence setup, this is exactly the sort of table saw accessory that pays you back in accuracy and convenience.
Set Up for Real Table Saw Work
This setup is about getting an auxiliary fence onto the saw fast enough that you will actually use it. The product is shown clamping onto a table saw fence and removing in seconds when you need to switch back.
- Designed to clamp to a table saw rip fence
- Image notes quick removal and reinstallation
Better Control on Thin Stock
Low-fence work is where this accessory earns its keep. By minimizing interference between the fence and a push block, it helps you guide narrow material more cleanly and with better control.
- Shown supporting narrow rip cuts on thin material
- Low-profile fence use improves push block clearance
Expandable Fence System
If you want more support from the setup, Woodpeckers shows a dedicated material support accessory for this fence system. That gives you a path to build out the setup based on the kind of stock you cut most often.
- Accessory shown as Auxiliary Rip Fence 7 inch Material Support
- Accessory identified as model ARF-MS
Key Specifications
| Brand | Woodpeckers |
|---|---|
| Tool Type | Auxiliary rip fence |
| Application | Table saw fence attachment for narrow ripping and thin material work |
| Fence Length | 48 in |
| Made In | USA |
| SKU | ARF-48 |
Compatibility
Primary Fit Designed to clamp to a table saw rip fence. Clamping Hardware Product images state Semble clamps are sold separately. Accessory Support Shown with optional Auxiliary Rip Fence 7 in Material Support, model ARF-MS.
Built For
Woodworking Cabinetry Furniture Making Trim Work Narrow Ripping Thin Stock Cutting
Pro Tip
Use the Auxiliary Rip Fence as your dedicated low-fence setup for thin strips and small parts, then pull it off when you need the full height of your stock fence. That keeps your table saw setup flexible without turning every specialty cut into a shop project.
Tool Nut’s Take
Tool Nut’s Take
Woodpeckers ARF-48 Auxiliary Rip Fence for Smarter Table Saw Setups
This is the kind of accessory that makes a table saw more useful, especially when your work includes thin stock, narrow rips, and repeat cuts where a standard fence gets in the way.
- Who it’s for: Woodworkers, cabinet shops, trim carpenters, and serious DIY users who want a dedicated auxiliary fence instead of a homemade temporary setup.
- Why it stands out: Quick clamp-on use, low-fence capability, and Woodpeckers build quality make it a practical upgrade for real table saw work.
- Worth knowing: The images note that Semble clamps are sold separately, so make sure you account for that when planning your setup.
Common Questions
- What is this product used for? It is an auxiliary rip fence for a table saw, intended to improve control for narrow ripping and thin material work.
- Can it be removed quickly when I need my regular fence? Yes. The product imagery states it takes seconds to remove and is just as quick to reinstall.
- Does it support low-fence cutting? Yes. The images specifically show it being used as a low fence to minimize interference between the fence and a push block.
- Is it made in the USA? Yes. The product imagery clearly states it is made in the USA.
Reviews
There are no reviews yet.