Key Features
Centered Layout Fast The Woodpeckers MT Center Gauge Deluxe Set gives you a quick way to strike true centerlines without fussing with math, dividers, or repeated measuring. Knife-Ready Bars The marking bars are milled from stainless steel, so they hold up well in the shop and work well with a marking knife for clean, precise layout lines. Multiple Bar Sizes With inch and metric marking bars included, this set covers a wide range of stock sizes for joinery layout, centered tenons, and general woodworking marking.
Overview
The Woodpeckers MT Center Gauge Deluxe Set, model MTCGSS-DEL-24, is a precision woodworking layout tool for marking the center of stock and laying out centered joinery. This is a center marking gauge designed for finding and marking accurate centerlines on boards and parts. If you build furniture, cut tenons, or do careful bench work, this tool takes a job that is usually slow and turns it into a repeatable, clean process.
What matters here is speed with accuracy. Instead of measuring from both sides and hoping your lines meet where they should, the gauge registers off the edges of the workpiece and places the mark in the middle. That is especially useful when you are laying out centered tenons or marking stock before milling. The deluxe set includes multiple bars in both inch and metric sizes, so you can match the gauge to the material you are working with rather than forcing one size to handle everything.
The build is set up for real shop use. The main body is clearly made for repeated handling, and the marking bars are milled from stainless steel. That matters because a layout tool only earns its keep if the reference surfaces stay true and the contact edge stands up to regular knife work. The stainless bars are specifically noted as being ideal for use with a marking knife, which is the right choice when you want a crisp line that guides a chisel or saw instead of a wider pencil mark.
There is also a practical detail built into each marking bar: a hole milled precisely in the center. That gives you a direct way to mark the center of your board without guessing, and the images show this being used with stock up to 2 inches thick. For shop work, that covers a lot of common hardwood parts, rails, stiles, and joinery blanks.
In use, the Woodpeckers MT Center Gauge Deluxe Set is aimed squarely at woodworkers who care about layout quality. It makes sense for hand tool users working with a marking knife, machine woodworkers laying out tenons before cutting, and anyone doing repeat joinery where centered lines need to be right the first time. It is also a good fit for shops that move between imperial and metric work, since the included bar set covers both systems in one package.
If you are the kind of user who notices when layout tools save you setup time, this is the appeal: less measuring, less second-guessing, and a more reliable centerline on thin or thicker stock. That is the kind of tool that stays on the bench because it solves a common problem cleanly.
Quick Centerlines Without Re-Measuring
For centered joinery, the goal is simple: get the line right and move on. This setup lets you register the gauge on the stock and strike a centered line directly, which cuts out the usual measuring steps.
- Designed for accurate center marking on boards and parts
- Stainless steel marking bars are ideal for use with a marking knife
Lay Out Centered Tenons on Thin or Thick Stock
Centered tenons are one of the places where this kind of gauge really pays off. When the shoulders and cheeks need to stay balanced, a true centerline keeps the rest of the layout honest.
- Shown laying out perfectly centered tenons on thin or thick stock
- Multiple included bars help match the gauge to different stock sizes
Direct Center Marking Through the Milled Hole
Each bar has a center hole milled into it, so you can mark dead center directly instead of striking two lines and splitting the difference. That is a smart detail for quick layout work at the bench.
- Center hole is milled precisely in each marking bar
- Allows center marking on boards up to 2 in thick
What’s in the Box
- Woodpeckers MT Center Gauge body
- (1) 1/4 in marking bar
- (1) 3/8 in marking bar
- (1) 7/16 in marking bar
- (1) 1/2 in marking bar
- (1) 4 mm marking bar
- (1) 5 mm marking bar
- (1) 6 mm marking bar
- (1) 8 mm marking bar
- (1) 10 mm marking bar
Key Specifications
| Tool Type | Center marking gauge |
|---|---|
| Model Number | MTCGSS-DEL-24 |
| Marking Bar Material | Stainless steel |
| Maximum Stock Thickness | Up to 2 in |
| Included Inch Bar Sizes | 1/4 in, 3/8 in, 7/16 in, 1/2 in |
| Included Metric Bar Sizes | 4 mm, 5 mm, 6 mm, 8 mm, 10 mm |
| Center Mark Feature | Hole milled in the center of each marking bar |
| Made In | USA |
Built For
Woodworking Joinery Layout Tenon Layout Furniture Making Cabinetry Bench Work
Pro Tip
If you are laying out tenons, pick the marking bar that matches your target thickness first, then use the milled center hole for quick confirmation marks on your stock. It is a simple way to catch layout mistakes before you cut.
Tool Nut’s Take
Tool Nut’s Take
Woodpeckers MT Center Gauge Deluxe Set is a bench tool that actually saves time
This is the kind of layout tool that earns a permanent spot near the workbench because it makes centered marking faster and more reliable.
- Who it’s for: Woodworkers, cabinetmakers, and furniture builders who regularly mark centerlines or lay out centered tenons.
- Why it stands out: You get stainless steel marking bars, both inch and metric sizes, and a direct center-marking hole in each bar instead of a one-size-fits-all compromise.
- Worth knowing: This is a layout tool for accuracy work, not a general-purpose ruler. If careful joinery is part of your workflow, that is exactly why it makes sense.
Common Questions
- What is the Woodpeckers MT Center Gauge Deluxe Set used for? It is used to mark accurate centerlines on stock and to lay out centered joinery such as tenons.
- Can it mark the center of thicker boards? Yes. The center hole in each marking bar is shown for marking the center of boards up to 2 inches thick.
- Are the marking bars suitable for a marking knife? Yes. The images state that the marking bars are milled from high-quality stainless steel and are ideal for use with a marking knife.
- Does this set include both inch and metric sizes? Yes. The deluxe set includes 1/4 in, 3/8 in, 7/16 in, 1/2 in, 4 mm, 5 mm, 6 mm, 8 mm, and 10 mm marking bars.
Reviews
There are no reviews yet.