Key Features
Aluminum Fence Face Replaces the stock 1/2 inch laminated plywood face with a 7/8 inch hardcoat-anodized aluminum extrusion. That gives you a straighter, tougher reference surface that holds up better to daily ripping work. More Workpiece Support This 48 inch Woodpeckers fence upgrade includes a 7 inch material support shelf. It helps keep wider stock and offcuts better supported as they move past the blade. Fast, No-Drill Install The upgrade installs on a SawStop T-Glide fence in minutes with no drilling or fence modifications. That means less setup time and an easy path to a more capable table saw fence.
Overview
The Woodpeckers Versa-Fence Face Upgrade for SawStop Table Saws is a fence-face replacement for SawStop T-Glide fences, built for woodworkers who want a straighter, slicker, more durable surface than the stock plywood face. This is a table saw fence upgrade designed for more accurate ripping, better stock control, and easier accessory mounting. For this variant, the model number is VFFU-PCS48, which corresponds to the 48 inch version.
The big change here is material and rigidity. Woodpeckers replaces the original 1/2 inch laminated plywood face with a 7/8 inch hardcoat-anodized aluminum extrusion. In plain terms, that means a fence face that is tougher, more stable, and less likely to give up accuracy over time. If your work depends on a reliable reference edge, especially when ripping solid wood, plywood, or long parts, that extra stiffness matters.
The anodized surface also includes PTFE, which reduces drag as stock moves along the fence. That is not just a nice spec on paper. On the saw, it means material feeds with less resistance, which helps you keep a smoother, more consistent push through the cut. Less sticking at the fence can make a real difference when you are handling sheet goods, longer boards, or pieces that need controlled feed pressure.
This 48 inch version adds another practical advantage: a 7 inch material support that mounts to the bottom of the fence face on either the infeed or outfeed side. That shelf gives extra support where it actually helps, especially when you are guiding wider panels, keeping narrow offcuts from dropping away too early, or just trying to keep stock more settled during a rip. For a table saw accessory, that is the kind of feature that earns its keep quickly.
Woodpeckers also built the top track to directly mount JessEm Clear-Cut Stock Guides. That is a smart move because it turns the fence upgrade into more than just a replacement face. It becomes part of a better workholding setup for repeatable ripping and more controlled feeding. If you already use stock guides, or you have been meaning to add them, this upgrade gives you a clean mounting solution without improvising brackets or drilling into the fence.
Installation is another strong point. The Versa-Fence Face Upgrade is made to go on the SawStop T-Glide fence with no drilling and no modifications. That keeps the upgrade approachable for serious DIY users and pro shops alike. You get a more capable fence face without turning the job into a custom fabrication project.
Build quality is exactly what you would expect from Woodpeckers. The extrusion is hardcoat-anodized aluminum, it is made in the USA, and the whole design is centered around cleaner setup, better support, and improved repeatability at the saw. This is not the accessory for someone who only uses their table saw a few times a year. It is for the user who notices fence flex, surface drag, and setup limitations, and wants those problems gone.
If you run a SawStop cabinet saw or contractor saw with a T-Glide fence and you want to improve your ripping setup, this upgrade makes a lot of sense. It is especially well suited for cabinetry, furniture work, trim work, and general woodworking where straight tracking and smooth stock handling matter. If your fence is one of the most used parts of your saw, upgrading the face is one of the smarter ways to improve how the whole machine works.
Smoother Ripping With Better Stock Control
A fence face should do more than sit there. This one gives your stock a slicker path and a more stable reference surface, which helps when you are feeding long boards or trying to keep a clean, steady rip.
- PTFE-infused hardcoat anodizing reduces friction along the fence face
- 7/8 inch aluminum extrusion adds stiffness compared to the stock 1/2 inch plywood face
Ready for Stock Guides and Smarter Setup
The built-in top track is one of the most practical parts of this upgrade. It gives you a direct-mount option for JessEm Clear-Cut Stock Guides, so you can add controlled feed pressure without drilling into your fence or piecing together a workaround.
- Top track is sized for direct mounting of JessEm Clear-Cut Stock Guides
- Installs in minutes on SawStop T-Glide fences with no drilling or modifications
Key Specifications
| Material | Hardcoat-anodized aluminum extrusion |
|---|---|
| Fence Face Length | 48 in |
| Fence Face Thickness | 7/8 in |
| Original Face Thickness Replaced | 1/2 in laminated plywood |
| Material Support Shelf | 7 in |
| Installation | No drilling, no fence modifications |
| Compatible Fence System | SawStop T-Glide fence |
| Made In | USA |
Compatibility
Fence Platform Designed for SawStop table saws equipped with the T-Glide fence. Stock Guide Mounting Top track is sized to direct mount JessEm Clear-Cut Stock Guides. Fence Upgrade Fit Installs without drilling or modifying the existing T-Glide fence assembly.
Built For
Woodworking Cabinetmaking Furniture Building Table Saw Ripping Sheet Goods General Contracting Remodeling Shops Serious DIY / Hobbyist
Pro Tip
If you run stock guides, mount the 7 inch support shelf on the side that best helps the workpiece stay settled through the cut. A little extra support in the right spot can make long or awkward rips feel much more controlled.
Tool Nut’s Take
Tool Nut’s Take
Why the Woodpeckers Versa-Fence Face Upgrade for SawStop Table Saws Is Worth It
This is the kind of upgrade that makes sense the first time you push a board across it and feel less drag, better support, and a more serious fence surface.
- Who it’s for: SawStop owners with a T-Glide fence who want a better setup for ripping hardwood, plywood, and repeat work.
- Why it stands out: You get a hardcoat-anodized aluminum face, direct compatibility with JessEm Clear-Cut Stock Guides, and a no-drill install instead of a weekend modification project.
- Worth knowing: This improves the fence face and how accessories mount to it, but it is still a fence upgrade accessory, not a complete fence system replacement.
Common Questions
- What fence does this fit? It is designed for SawStop table saws that use the T-Glide fence.
- Does installation require drilling? No. Woodpeckers states it installs in minutes with no drilling and no fence modifications.
- Can it mount JessEm Clear-Cut Stock Guides? Yes. The top track is sized to direct mount JessEm Clear-Cut Stock Guides.
- What is different about this 48 inch version? The 48 inch model includes a 7 inch material support shelf that can mount on either the infeed or outfeed side.
Reviews
There are no reviews yet.